You will need
- Cloth;
- - sewing machine;
- - thread to match the fabric;
- - elastic band.
Instruction
1
Future measure the length of the skirt from waist to desired location. Increase the length by half. That is how much you will need fabric for the top skirt and lining - 15 cm less. Choosing the material for sewing, please note that the greater the width, the greater the magnitude of the wedges down, that will make the skirt more poofy. Fabric from natural fibers before we will open necessarily wash. When selecting natural cotton or flax do not forget to make allowance for shrinkage.
2
Fabricate the pattern. Measure around your hips, add to the resulting figure 3cm and divide the result by 8. Get the size of the narrow part of the wedge. Measure the middle and down to the height of the wedge perpendicular to the guide line. From below at an angle of 90 degrees in both directions from this line print the line. The bottom of the wedge should be wide as much as allows the width of the fabric. On each side of the wedge, leave 1.5 cm for seam. Laying out pattern pieces, make sure that the lobe filament was parallel to the edge of the fabric. Padding in cutting work, make the wedges to 10cm shorter.
3
The long side of the wedges sewn on the serger or regular sewing machine seam "zigzag", then sew. Ratatouille seams. The same operations repeat with lining fabric. Sewn top and bottom edge of the skirt. Ruffles for cutting of fabric long strips of the desired width. Length ruffles should be twice the width of the skirt at the bottom. Pin it to the bottom of the padding, forming neat folds at regular intervals. Pristrochite.
4
Take a break zone length is equal to waist circumference and a width of 10cm. Fold the waistband in half lengthwise and pin it to two skirts at once. Sour cream and prostrochite. To keep the form, insert the wide stiff elastic band. The top of the skirt can be decorated with pockets. Make pattern pocket. Roskrow, on top of parts sew the elastic. Then sew already gathered pockets to the skirt.
