You will need
- Conventional and rubberized hammers, chisel or metal tube, screwdriver
Instruction
1
When disassembling office chair may need conventional and rubberized hammers, chisel or metal tube of circular cross section with a diameter of 30-40 mm.
2
Install a chair near the wall, become the legs on the crossbar facing the chair and grip the armrests. Let the assistant insures you against a possible fall. Pull the seat over the armrests up, swinging it in different directions.
3
If the bed is separated from the gasand turn the star base gas lift down and hold the weight just above the floor, tapping with a hammer around the edge of the gas lift. Use a chisel or a metal tube in the case if the hammer is not reaching the edge. Tapping it gently, trying in any case not to fall on the center of the gas lift – there is a bracket, shock-sensitive.
4
If the gas separated from the crosses, but remained in a swinging mechanism, hold the chair with gas lift down. Raskatayte his blows of a rubber hammer on the top step, reaching out of the swing mechanism. Gas lift will be slightly loose and out.
5
After separation of the gas lift, remove the wheels. Sometimes when removing wheels hands metal pin remains in the cross. Remove it with pliers and return to your seat with a hammer or manually.
6
If you need to replace the swing mechanism, Unscrew the four fixing screws and remove the mechanism.