How to put the arch liners

It is difficult to imagine the operation of a vehicle on Russian roads without the inner fender installed. On unprotected metal gets salt, rocks and sand. Treatment anti-corrosion coating does not protect the wings of the machine against mechanical corrosion. Therefore, lockers are better to install. They can significantly extend the life of the metal without replacement. Modern lockers are made of high quality materials and perfectly protect the car.

You will need

• -screws, pins, or staples
• -lockers need stamps
• -corrosion-resistant coating
• sealant
• -drill

Instruction

1. The installation of the wing flaps on the car are best left to the professionals. It is not expensive. Before installing it is washed and thoroughly dried. Then the surface is treated with protective agents, and not only external, but internal, in the home can hardly be done.
2. If you decide to install the lockers yourself, then you will need high quality lockers, just repeating the surface of the arches under the wheels.
3. The design will depend on the car's suspension. There is a whole wing flaps or cut. Choose the wheel arches, the appropriate model of your car. They always state the grade for which they are intended.
4. Depending on the wing flaps and model of car to mount them on the screws, staples or special clips. Buying lockers, consult the sales assistant what kind of mount is most suitable for this model of wheel arches.
5. Along with wheel arch liners and fixings do not forget to purchase corrosion-resistant coating, which you will cover the wheel arches before installation.
6. Wheel before installing, you must remove, arches thoroughly washed and dried. You need to dry with hot air.
7. After drying, carefully apply all the available places anti-corrosion coating. It must be dry in accordance with manufacturer's recommendations. Only after a full dry set the wing flaps.
8. Depending on the car model and purchased lockers attach them with screws to 7-8 points on the edge and 2-3 in the middle of the wing. The handle screws sealants. If the model of the car and the wheel arches requires special mounting clips or clothespins, attach in accordance with the instructions.
9. If lockers are not properly secure, it partially metal will be left without protection. That's why it's so important to use the services of professional masters.