You will need
  • - application in electricity distribution company;
  • - passport;
  • - resolution;
  • - the act of putting into operation;
  • - a new contract.
To dismantle the old meter and install the new is strictly prohibited. Contact who supply the company with a statement. In the statement specify the type of meterand that you want to set single – rate, double-rate or trentine. If you have been issued a notice, to change or install a new meter, you still have to write an application and obtain authorization by resolution of the head of the grid.
Within the specified time come for a permit and bring the metering device, which you will set. You will program new the counter , and only then, you can install it. The counter can be set independently, it is not prohibited by the rules or to invite the master of the grid.
If you called someone, you don't need to care about the rules of installation electrocounters. Specialist will perform all installation in accordance with the rules and regulations.
With self-installation please observe the installation rules electrothe counters. Install the unit in an accessible location at a height of not more than 1,70 and at least 80 cm, at a closest distance from the cable input. All connections are make with the use of special clamps, clamp the device on a wooden, plastic or metal flap. The room where the appliance is installed must have a temperature not less than 0 degrees in the cold season.
After installation of the device, regardless of who carried out the installation yourself or an electrician, call representatives from the Department for work with clients. They will make the act of putting the unit into operation.
With this act and with the passport, please contact the Department on work with clients and sign a contract for the supply and payment of electricity. This should be done even if you already have a contract as the new contract will specify the type of electrometerand its serial number.