You will need
- -alcohol medical
- detergent with chlorine
- -oven (boiling water)
Sterilization in an oven is typically used for processing tool at home. Thoroughly rinse the entire instrument with the use of a disinfectant (chlorine) and a tray on which lay aluminum foil. Turn the oven to the highest temperature and place a baking tray with the tool. Wait 15-25 minutes and you can use it again. This method is not suitable for processing tools with plastic elements.
Boiling is also well remove all the germs. Can clean the tool and put it for 30 minutes in boiling water, heat don't need to disable. Gently using tongs, remove it from the pan and place on a clean, dry cloth. After drying put the tool in a tight package and tie. Take the tool out of the package only sterile forceps and try not to touch them with my hands.
Pour pure rubbing alcohol in a bowl and place the cleaned instrument for 30 minutes. Make sure that the solution completely covers the tools. Then remove them and dry them, then put in a sterile package. Surface cleaning tools can remove viruses and bacteria, they are killed only by prolonged contact with alcohol.
Advice 2: Should the Barber to sterilize Barber instruments
Every self-respecting beauty salon or Barber shop always tries to provide its customers with the best service possible. However, some customers still ask the question "how clean are the tools of a Barber?" - because they can be microscopic particles of skin and dander left behind from previous visitors. So should the Barber to sterilize his equipment?
Sterility hairdressing tool
Combs, scissors and brushes used by the master when cutting hair, you must wash in running water, cleaned of visible contaminants and then putting them in a solution of disinfectant. The tool needs to be completely immersed in it, and after rinsing with water. Also, a hairdresser can use a very concentrated spray sanitizer that is sprayed on the surface of the tool.
In addition, in beauty salons must be cleaned and disinfected hot-cabinets for handling tools.
Hairdresser at the beauty salon or the hairdresser is also required to be sterilized thoroughly curlers, clips, nets and caps for Curling under running water with detergent. Removable electric knives machines should be disinfected after each client with disinfectant, and fixed metal parts shall be thoroughly cleansed of hair, and twice opryskiwacze a sanitizer. After treatment, hairdressing tool should be stored in a special place where you will not be re-contamination.
Mechanical cleaning or sterilization of the tool
Cleaning feel cut off hair and Barber is obliged to make in the back room or a specially designated place. Prohibited hair blow drier or off of babydolls near your chair because they fall into the respiratory tract and can cause severe throat irritation or allergic reactions. For the disposal of used gowns and hair, the hairdresser should use a sealed container of which the inside is lined with disposable trash bags.
Ideally every hairdresser should be not one but several sets of grooming tools, which he can change before the end of disinfection.
Re-using trash plastic bags and shaking out their contents in a container for household waste is strictly forbidden. Disinfection of hairdressing equipment can also be performed using UV lamps, which serve as a bacterial sanitizer and storage tool disinfected before the next use. Also, the hairdresser should keep clean of the working mirror, chair and table, which accumulates a huge amount "footprints" customers in the form of particles of hair, dandruff and dead skin cells.