You will need
- Liquid dishwashing, ammonia, gasoline, kerosene, mineral spirits, acetone, windshield wiper.
Instruction
1
Prepare the following solution. Mix 1 teaspoon dishwashing detergent and 1 tablespoon of 10% ammonia. Apply the solution on the contaminated area of the glass and leave for 1 hour. During this time periodically to moisten the stain. When the glue is softened, carefully remove it with a utility knife or other sharp object.
2
Buy at an automotive store or petrol station wiper. Apply the product on the stain and wait a few minutes. Then remove the glue with a utility knife.
3
If you didn't have the wiper, use gasoline or kerosene. Dampen a cotton ball in the solvent and attach to pollution for 15 minutes. After that time, scrape off the glue with a razor blade knife.
4
To clean the glass from the glue spots, you can use acetone, mineral spirits or liquid Polish remover. Apply the product on the contaminated place and wait a while. Remove traces of glue with a scraper or razor blade.
5
Fresh stains from white glue, gently remove the paper towel. Then wipe with a sponge dipped in clean warm water. Wipe dry with a cotton towel and Polish. Inveterate stains before removing the need to soften. Therefore, apply to the contaminated area with a little dishwashing detergent diluted with water, and leave it for a while. Then wipe the glass with a soft cloth.
6
After the glass is completely cleaned, wash it. May be used for this wiper. Evenly spray onto surface, wipe with a cotton towel and buff to a Shine with the microfiber cloth. May also dilute ammonia in water - 1 tablespoon of ammonia in 5 liters of water.