You will need
- construction Hairdryer;
- - hair dryer;
- - vegetable oil;
- - sponge;
- - solvent acrylic adhesive;
- - solvent means;
- - essential or eucalyptus oil;
- - stationery knife;
- - cleanse for me.
Instruction
1
If you need to remove bilateral adhesive tape from any surface, use a special solvent acrylic adhesive. Before that, heat the tape using a Hairdryer. Remove the polypropylene or foamed basis, apply the solvent to a sponge and use it to clean off glue residue.
2
Use acetone, gasoline, kerosene, white spirit, solvent 646. Heat the tape using a hair dryer, remove the base, apply one of the means to the sponge will remove the glue residue.
3
Instead of building dryer you can use a hair dryer. It is possible to heat the entire surface of the base, but only the edge to hook the tape on and off.
4
Acrylic adhesive begins to move away from the surfaces, if it is abundantly grease with oil. For these purposes, you can use any vegetable oil. Put the sponge, liberally lubricate the tapeand leave for 12 hours. Through this time period you can easily remove it without the use of thermal methods. Remaining oil and glue remove with any solvent compositions.
5
If you remove the tape from the glass, instead of the solvent may use an x-ACTO knife. Remove the base, gently scrape off the glue residue, clean the glass using the cleanse for glasses that you can buy in any store for motorists.
6
Do not attempt to wash surfaces with acrylic adhesive residues with detergents or cleaning agents. The adhesive on the bilateral adhesive tape, it is not exposed to wet and remove it with plain water and detergents you will not succeed.
7
If you need to remove adhesive from a painted surface, do not use the heating method and solvent means, as you can damage the painted base. To remove the tapeand lubricate it or eucalyptus essential oil, leave for a few hours, remove the base. Remove glue residue from the surface with the help of cleanse for glass, which will not harm the varnish.