Before improvement the health of their components need to know: acceleration processor, accelerates the user and the computer's main memory. To overclock the RAM preferably via BIOS, not the operating system, as in this case would be much less of a hassle. In addition, before you begin this procedure, it is advisable to read the user manual to the motherboard that is installed on a personal computer. And the last but no less important, is that not following the instructions may lead to unfavourable consequences.

Update The BIOS



To start the user should upgrade the BIOS. Download and install new version of BIOS can on a special website. The user can do otherwise and pull out the battery from motherboard for few minutes or use a special jumper, which is also located on the motherboard. It should be noted that this is done solely with the power off of the computer.

Overclocking RAM



When the BIOS is updated, you will need to open it with the button Del, press you want before loading the operating system. In the window that appears, find the tab " Advanced BIOS Features (Advanced BIOS Features or Power, depending on the motherboard and version of BIOS). In this tab, disable all Speed Spectrum settings, that is, change the value to Disabled and using the F10 button to save the changes.

After rebooting again, you need to go to this Wednesday, the item Advanced and find the item DRAM Configuration and then go to the tab MemClock. The value should be reduced, for example, if the standard frequency is set to 667 MHz, you will need to install approximately 533MHz. To find out what frequency the memory works, you can use the program Everest. Changes are saved and the computer restarts.

Then again, you need to go to BIOS and find the item HyperTransport Frequency and the value of translate from "AUTO" to x4 or X3. After restart BIOS will need to find the option Intlligent MB Tweaker. Here you need to go to the tab of PCI-E Clock and set the frequency to 101 Mhz. Further, in paragraph (CPU Voltage Control set the voltage value on the standard that shall be applied to the CPU by default. Information in specific documentation to the processor.

Then you have to open menu CPU Clock Ratio and set values on X9-X11, and CPU Frequency or CPU Clock/Speed you can set the frequency. To do this, a nominal processor frequency should be divided by the multiplier you set, and then you can learn how to set the FSB (CPU Frequency). Already here and starts acceleration. This should be done gradually. We need to raise the FSB, para CPU Frequency (MHz) 10 15, 15 20, etc.

After each change of this value it is advisable to go into the operating system and verify its performance. As a result, the system and the software installed on the computer should work faster.