It would seem that in the presence of a modern personal computer can do without most consoles. Because the aid of nostalgic gamers can come special programs — emulators. These programs create a virtual environment where you can run games written for one or another console. There are programs and games of "Shogi".
Moreover, the emulators "Sega" is for mobile phones and tablets using the Android system. Simply install the program, download favorite games to customize the controls and you can play.
But what if you want to get out of storage an old console, to dust off the box that holds the cartridges, and invite your friends to play your favorite games? Today many houses are modern flatscreen TV. However, the interfaces of "Shogi" allows you to connect it to this receiver.
Connection "Shogi" with the AV cable
The best way to connect — use the AV cable. For the distinctive look of plugs these cables are called "tulips". One of the channels of the cable responsible for sound transmission, the other transmits the signal. Almost all models of modern TV sets equipped with the appropriate connectors.
Connect one end of the wire to the "neg" and the other to the TV, following the color coding. Find the button on the remote, switching the signal sources. If your TV receiver has several entrances, and you're not sure which of them are involved, insert the cartridge and turn on the console.
Going through different entrances, you will find a picture with "Shogi". Console ready to play with. This connection method is good in that it provides a better image quality.
In some televisions the role of the AV-connector plays a different interface — SCART. Its popular name — "comb". You can buy the AV adapter-SCART in most stores for ham radio.
Connecting to it via console, configure the TV just as in the case of conventional AV. Please note that some adapters of this type can be switch in/out, change the direction of the signal. Put it in the position in.
Connection via antenna cable
What to do if you have no way of connecting to the AV connector? It's a loose cable, broken or missing connector on the TV? Not
trouble. There is another way.
Use coaxial cable. It is used to connect the antenna socket, which must be equipped with any serviceable receiver. The disadvantages of this connection type "Shogi" — lower the picture quality and difficulty settings.
Combining Sega and a TV with cable, insert in the console the cartridge and turn it on. This is a necessary condition, because you will need to configure the channel on the frequency of attachment, and for that she needs to send the signal.
Turning on the console, switch your TV set to the free program. Activate the function settings TV channels. Exhausting air frequencies, your device will find the signal from the console.
Get the highest quality image and sound. If necessary, use the fine adjustment. Now you can play.