How to insert the needle into sewing machine

The ability to fill a sewing machine, it is extremely important for a novice seamstress. Improperly inserted needle can cause a lot of trouble. In the best case, the machine just stops working. But the needle can pop out and cause injury. Therefore, before you sew, be trained to insert the needle.

You will need

• - sewing machine;
• - needle;
• - a small ("clock") screwdriver.

Instruction

1. Most sewing machines sold with a needle already inserted. But the needles — the subject is not universal, they come in different thicknesses. For each tissue it is necessary to choose. So try to learn to insert the needle at once. Use a small screwdriver to remove the screw and gently remove the needle, trying not to flip. View and remember how she was standing. Typically, the needle position is indicated in the instructions. Read it and save it. Please note what needle is in your machine. They can be cut or round cones. Further buy such needles.
2. Considering the needle, you will see that on the one hand she has a long groove. This will be your benchmark, because the position of the groove should always be the same. There are cars where this groove should be located directly in front of the seamstress. As a rule, they provide only a zigzag line. Ordinary household machines groove faces to the right. If a needle with cut bulb, the slice is different machines, or in the direction of the seamstresses, either from the sleeves.
3. Before changing a broken needle, or replace it with thinner or thicker, disconnect the electrical machine from the network. Put the needle bar to its highest position. This is done by using the flywheel. Remove the screw of the needle holder. Remove the old needle and put it in a box or stick in a pincushion. A broken needle read the numbers before throwing it out.
4. Pick up the needle the desired appearance and the desired thickness. Hold it with the grooves in the desired direction. Insert the needle into the hole until it stops. Tighten the screw so that the needle is not hanging out and not pop out. Pass thread. Before you sew the parts, try to flash the unnecessary scraps of the same fabric. If the machine for some reason does not sew, pick up a needle of a different thickness.