How to insert a button in the laptop

The laptop keyboard is practically no different from the keyboard used on personal computer. The same buttons, the same key sequence, the same principle of fastening buttons on the base. You don't need to be a computer expert to insert a button in the laptop, these steps are quite simple.

You will need

• Laptop, button, clip.

Instruction

1. Before you consider the installation process the buttons on the laptop, you should talk about how to remove the button. That is, the procedure for replacing keys on a laptop will be considered from the beginning. So, what must be done to replace the buttons on the laptop keyboard.
2. The removal keys. If on a standard keyboard of a personal computer, this operation takes place without complications (the key just obkladyvaetsja on both sides and removed intense movements to the sides), then when removing the keys from the laptop, the user should be more careful. There is a large likelihood that you damage one of the mounts button. In the future, this defect is considerably spoil your mood when you work with a laptop.
3. To remove the key from the base, you need to do the following. Find a paperclip and unfold it. Slide the clip under the lower portion of the key, then, pull it on themselves. This should be done very carefully. In most cases, the key can be easily and removed from the base. If you need to remove a few keys, do the same operation with each of them. It should be noted that before removing the buttons, you should record their location on a sheet of paper. This will help you in the future to collect the keyboard in the right way.
4. Setting the keys on the laptop does not require the user of the care that was relevant when removing buttons. However, you should be very careful. To install the button on the laptop, set it to the correct location. Once the key will take its place, a slight tap of your finger apply it to the platform. The button is fixed with plastic fasteners.