You will need
  • - Mount'n'Drive;
  • - бокс SATA-USB.
Instruction
1
Quite often a failing hard diskand is associated with the failure of the boot sector. This means that on this device you cannot install the operating system and use it as a primary drive. Try to connect this hard disk as a secondary disk.
2
The main catch is that mobile computers cannot connect directly two the internal storage. Get an external box that allows you to connect hard diskwith IDE or SATA to a USB port.
3
Install the hard drive in the box and connect it to the mobile computer. Of course, you'll need another hard diskon which operating system is installed.
4
Internal drives laptops with SATA interface can be connected to desktop computers. To do this, remove the Winchester from the body of the laptop and remove the carriage. Be sure to remove the mounting slide from the hard disk.
5
Connect the drive to the motherboard of a desktop computer, using the ribbon cable from the SATA connectors. Turn on the computer. Wait some time until the operating system detects the new drive.
6
Check out the standard ability to copy information from the hard disk. Extract the files you need and format the device. If the Winchester is not available for work, install the program Mount''n Drive. Start it.
7
Just right click the icon of the corrupted disk. Select "Mount" and enter any letter drive. Wait for the creation of a new local volume.
8
Open its contents using Windows Explorer. Remove the important files and disable hard drive. It should be noted that the read speed of a mounted driveand can be very small. Don't waste time copying information that is easy to recover other ways.