You will need
- - lightweight soft fabric;
- pattern any pants;
- - Laundry gum;
- supplies for sewing.
Instruction
1
Select the fabric. Trousers-bananas it should be light and have a good lie down pleats. Suitable natural and artificial silk, viscose knitted fabric, thin waterproof fabric, etc. Quantities of material depends on your size and fabric width. With a width of 140 cm and is large enough to be of the same length, unless you have very wide hips.
2
Take the pattern any straight trousers. In this case, the most suitable pajama bottoms. They always do free, but they can also be different style. If the pants are cut just two parts, then they can not rip, and to circle right, making allowances for seams and ACC. Pajama bottoms, consisting of four parts, the better to strut. Any other free old trousers, too, need to rip, and undercut too - you will need them.
3
Wide fabric fold in half in equity. Outline the pattern. If the material is narrow, fold it on the duck so that parts can be cut in pairs. For the belt cut a strip that is the length of the waist plus seam. Its width is equal to 6-8 cm
4
The slices can be directly treated with a serger, especially if the fabric fray badly. Baste and sew step seams, then side and. Ratatouille allowances.
5
Try on the pants. Lay the pleats and how many of them tailor pins or baste. They should be located symmetrically around the midpoints of the front and rear parts of the outside matter of the two parts you sew pants-a banana or two.
6
Fold the waistband in half lengthwise wrong side inside and zautyuzhte a fold line. Fold the allowances along the long seams inside and also zautyuzhte. Align the cut of the belt on the front side with the top cut of the pants. Sweeps and sostrochite details. Then on the reverse side pristrochite second cut of the belt, trying to get into an existing seam.
7
Fold the legs double at 1.5-2 cm Baste ACC and pristrochite or hem pants by hand. Pass in the leg and waist elastic and adjust its length.