How to wash the bottle

It would seem, it's not that hard to wash a bottle. However, if you need to clean a large amount of recycled packaging (e.g., clogging of house wine), it can turn into a problem. Grime, blooming from stagnant water on the glass surface, adhesive paper and plastic labels, excise stamps - will have to Tinker.

You will need

• - brush;
• - dishwashing detergent (soda, salt);
• - fine abrasive for filling bottles;
• - acetone or solvent;
• - means for removal of mineral deposits;
• - a tool for removing labels;
• - cleaning powder;
• warm and hot water;
• - roomy capacity;
• knife, cloth, hard sponge.

Instruction

1. The easiest way to wash the bottle – a good old brush, hot water and a small amount of baking soda, salt or liquid for washing dishes. Residues of household chemicals has not settled on a glass cavity, rinse the bottle under running water or in several clear waters. Pouring liquid from time to time, vigorously shake the bottle.
2. If the walls of the vessel remain difficult contamination (e.g., a green or brownish tinge microscopic algae) need to use abrasive media. Fill the dirty container with sawdust (cereals, coarse sand, egg shells, etc.). If you are engaged in cleaning of bottles in the summer - just grass.
3. Add in a container of water and shake well the bottleuntil the dirt is away from the inner walls. Then you will just have to wash and rinse containers.
4. Use a special solvent mineral deposits, to get rid of the plaque white. It is produced in bottles for storing in the hard water. This means you can search in the store household chemicals (for example, Sanox, "Chimitec", etc.).
5. To remove the paper label bottles are usually soaked in a roomy container with very warm water for a few hours. To speed up the process, to water you can add a little dishwashing detergent.
6. After soaking some labels fall off the bottles themselves. If you used a more powerful adhesive, the debris will have to clean off with an abrasive sponge and scouring powder. At the same time will wash away and traces of glue. Film labels pour hot water and remove the tip of a knife.
7. If the glue is not amenable to the sponge and the powder, wipe it with acetone or solvent. You can search and specialized industrial tool for removing labels like "Antivandal" or ". Label".