What is Izospan ""
A vapor barrier is the best option is to use Izospan. All because this material creates an excellent barrier between the insulating layer and the external environment. Izospan "In" can be used in rooms with different purpose.
The structure of the material is twofold, wrong side has a rough, and the front is very smooth. The last turn to the external environment, and the rough layer is placed on the heater. Its peculiarity consists in the fact that the irregularities contribute to the retention of a large volume of condensate that can be drained in the drainage system. Izospan "In" is relatively inexpensive and is an effective material for protection from moisture.
How to use Izospan ""
In many cases, Izospan "In" is used as insulation of the roof and the attic. It goes well with all types of roofing materials. Installation of material constitutes its fastening to the truss system or between the walls. It is noteworthy that it is necessary to install it overlapping, and the joints sealed with insulating tape.
Quite often you can see Izospan "In" as external insulation to low-rise buildings. The material is fastened to the sheathing with galvanized nails. Replace them with a construction stapler. Izospan "In" must be applied only from below upwards, the width of the overlap is better to do not less than 15 centimeters.
It happens that it is necessary to attach a vapor barrier inside the living room, which is decorated with paneling or something similar. In this case, Izospan "In" is placed on a slatted base that is already impregnated with antiseptic solutions. If Izospan will be used in tandem with the plasterboard, then it must be strengthened by means of metal rails. The important point is the presence of a gap between the vapor barrier and the wall, as otherwise the condensate will not be removed.
Izospan "" protects numerous components from destruction by fungi and corrosion. Moreover, such vapor will not penetrate inside the fibers of the insulation.
When Izospan "In" is used when laying laminate or parquet flooring, the material should be fastened with little time on the wall. If necessary, is reinforced sealing longitudinal seams with tape connecting destination.