You will need
- gas canister for refilling lighters, adapters.
Instruction
1
In order to fill a refillable lighter with gas, you must first take care of the security of the event. Make sure there are no open flames, e.g. gas stove; no hot objects such as heating apparatus with a filament included electric stove. In no case do not smoke during this time and do not refill the lighter with the other smokers at this point people.
2
Excellent method of filling is as follows: when the lighter ceased to give flame, open the exhaust valve to the maximum, hold it down for 3-5 minutes at the same time pressing in intake valve a writing end of a ballpoint pen. The remains of the gas would come out before, but not fully - the heat of the lighter in his hand gives the best result. Wrap the intake valve again, as far as possible and leave the lighter to cool for 10-15 minutes.
3
While the lighter cools to room temperature, hold a gas canister in hand for the same purpose. Usually included with the tank sold a set of six adapters, one of which is connected to the valve of the lighter empirically: it fits snugly into the receiver valve and does not let gas out. Wear appropriate adapter to the nozzle of the spray can and shake vigorously several times.
4
Take a lighter up to the intake valve; check whether the key is pressed gas flow; if there is no cover on top, insert the spray adaptor into the socket for refilling. For 10-15 seconds, press the upper hand two or three times without pulling to the end of the adapter valve. Repeat this operation several times.
5
Then leave the lighter on for a few minutes until the gas in it will not heat. After that open the flow of gas stronger light for a few seconds the fire (be careful - the flames get high) - this action is purged from the nozzle coking. Turn down the gas flow to more secure. Now a lighter can be used.
