You will need
  • - graph paper and drawing utensils;
  • - sewing supplies, sewing machine and overlock machine;
  • - fabric width 140-150 cm for the base of the skirt - 2 lengths; for shuttlecocks at the rate of 120-150 cm of frills from 1 meter of fabric.
Instruction
1
The Foundation skirt for flamenco is the long skirt-the year of the six (or more) strongly flared wedges. The value of the flared hem skirt is from 1 to 2.5 "of the sun" (full circle), which is achieved by various methods cut. For the construction of the pattern of the wedge remove the three measurements: waist (+ 1.5 cm =), thigh girth (+ 1 cm = ABOUT) and length (DI), and define the desired width and number of ruffles.
2
On graph paper draw a vertical line of the middle wedge and the horizontal waist line; parallel to it at distance 19-20 cm through the hips. Aside from the waist line a distance equal to the length of the skirt minus the width of the lower flounce and draw a line bottom. Both sides of the line of the middle wedge is put on the waist line segments equal to half the values of/6, hips – half of the value of ABOUT/6, through the resulting points draw a vertical line.Side-parting between the lines of the waist and hips make little raised lines. The sides of the wedge will continue from the hips symmetrical lines perpendicular to it (the angle of the solution "year" may be less). Put on them distances equal to the value of the cut between the lines of the hips and bottom skirt. The bottom line is make a smooth semi-circular curve. Check the levels of primaqiune flounces (if any).
3
Pin the pattern to the fabric (you can fold it layers). Outline the pattern and make a seam 1.5 cm from all sides. Take six equal wedges. Also will have plenty of time: its length is equal to + 5 cm on a clasp + 2 cm for seams, and the width equal to twice the width in finished form + seam 1.5 cm
4
Sew the wedges on the sides long curly and Ratatouille seams. The seam on the left side of the skirt top to leave room for primaqiune fasteners (15-18 cm). Vsheyte hidden clasp-"lightning". On the margins, in places the beginning of recklessne nadsekite corners. Treat sections of the seams on the serger.
5
Sew the belt and run it double closure: one button closure on the outside and a button or hook on the inside. Strong closure is necessary because it will withstand quite a heavy skirt and very vigorous movements of the dancer.
6
The flounces are sewn together from several parts. Every detail is a ring with an inner diameter of 15 cm and a diameter of the outer circle equal to twice the width of the flounce plus 15 cm Number of parts of each flounce is calculated from the length of his primaqiune: this value divided into the length of the inner circumference of one part of the flounce.
7
Take a break and sew details of lower flounce, treat it the lower section of the overlock seam "rulik" of thread to match the main fabric, or, conversely, contrast. Shuttlecocks can make a double – top layer of main fabric, and the lower contrast (and lower layers can peek out from under the top). In this case, take a break and sew both parts of the double flounce, the lower sections of the handle and baste the top slices with each other.
8
The bottom flounce (single or double) sew to the bottom cut of the skirt. Fold the flounce and the cloth of the skirt right sides, combining slices, and lay in place. Zautyuzhte allowances from the wrong side upwards.
9
In the same way take a break and sew on the target the rest of the ruffle, laying them on the cloth of the skirt face to face and a raw cut in the side of the bottom of the product. Can be a little priotity seam grinding from the front side through protohellenic or using a removable sole plate.