How to sew a sundress

Before sewing the sundress, decide the model, colour and length of the future product. The ideal option is to draw a thumbnail, and download the finished pattern in a similar model. when this preparatory work you will be able to appreciate the complexity of sewing and the required amount of fabric. The following option is minimum and maximum tissue.

Instruction

1. Will have plenty of fabric a few details. First, the two and a half - or two-meter band – do you decorate the bodice. Then four semicircles with center cut out (by combining the cutout will match the circumference of your waist, the radius is the length of the legs), which will serve as the skirt of the sundressand the two parts of the belt (length of each part at the waist, width of 3-4 cm). Every detail is cut out taking into account allowances for seams.
2. Fold and finish the edges of the parts (except the belt) overlock. Belt detail put one on the other face inwards, sew on the two narrow sides and one thick. Remove the belt.
3. Sew the skirt to the belt, bending its edges a bit and sinking the waist belt. Ensure that the edges of the belt and skirt match. In the side or back seam before permanently stitching to insert zip.
4. Sew the edges of the stripes of the bodice to the front skirt part is symmetric, if necessary probarte. Sundress ready. This model can be called a sundressom-constructor, because raising or lowering the waistline, you can adjust the length of the skirt, and a long strip of the bodice you can fold, twist and tie in many different ways, just to have enough imagination.