How to connect a house to electricity

In order to connect the house to electricity, must perform the following procedures. After all necessary documents have to hire a licensed electrician, so as to climb the pole to connect the electricity to the power network wires is very dangerous, needs special skills.

You will need

• -wire to connect from the pole to the house
• -gofrotruba
• -anchor–hook
• -meter
• -permission to connect
• -the contract for the supply of electricity

Instruction

1. First, go to the power company. Write a statement about the desire to connect the house to electricity. Enter your houseasny address and the desired power consumption. For a private dwelling houseand it is enough to specify 5 kW. The statement you will sign, and with it, contact the service center that works with clients. There you will produce a paper on the technical conditions of connection. It is approximately one month.
2. Until you produce the document of technical conditions, buy a cable of the necessary length. It needs to be brand forces the clips to it, gofrotruba and anchor – hook. Don't forget to buy the meter. The meter should connect and install the representative of the power company. After connecting, it immediately will seal and make the act of connecting and sealing. With act, you must go to the Department for work with clients and sign a contract for the supply of electricity.
3. After receiving permission to connect and the technical conditions it is possible to conduct electricity from the pole to the house. What would make you hire an electrician. Insert the cable into the house. Place the meter on the panel. Further, the connection of the counter described above. The meter must be installed in the place, specified in the technical specifications.