You will need
  • - woolen yarn of medium thickness;
  • - acrylic fine yarn;
  • - 5 hosiery needles (No. 2.5 and 3.5);
  • - 2 straight knitting needles No. 2 and 2.5;
  • - darning needle
  • hook.
Instruction
1
Try to associate a comfortable hat for a newborn: with headband elastics, round shape, with ears and ties. Start with calculation of the line of the bezel: remove the measure head circumference of the baby above the line of his eyebrows and the convex part of the head. Add 1 cm to freedom fit – do not forget that the product is a thick, double. As a sample use of finished knitted cap "on the head" of a child in the process, it will help you to make the necessary fittings.
2
Tie knitting pattern and calculate its density. So you figure out the required number of loops that need to gain. Dialed loop distribute on 4 stocking knitting needles and make circular rows of gum 1x1 (always alternate one front with one back loop). You should have about 6-8 cm stretchy fabrics (this is the future hem double strap bottom).
3
Keep working on baby caps selected textured or multi-coloured pattern, or just do socks and binding (in each circular row vymazyvaja only facial loops). At the end of the rubber bands go on the spokes of larger size (e.g. from №2.5 №3,5).
4
Measure nebazhannya a hat on the baby or the cap-a pattern to adjust the height of the product. To the top of the cap gently rounded (not going large assemblies), at a distance of about 8 cm from the top of the head start a gradual subtraction loops. To cut the cloth for one loop, you'll need to purl together the two adjacent filament loop. Perform the subtraction at equal intervals in every second circular row of cutting at one time no more than 8 loops.
5
When davaite cap to the desired height, close the remaining loop and tighten them firmly with a thread. Cut off the tail drag with a hook on the underside of the product. Before you – the top part of the winter beanie for the newborn.
6
Remove the external detail of the product inside-out and proceed to perform an internal cap. For convenience, it is recommended to switch to straight needles, and then perform the connecting knitted stitch.
7
Enter the loop from the wrong side of the external headgear on last row of strap-elastic. Yarn for domestic hats need to be more subtle than external. It is good to take the children's acrylic - flexible and pleasant to wear. The number of loops must be a couple less than when performing the front side of the double product.
8
Tie the lower cap forward and reverse ranks of the front surface (in facial series – facial loops, purl – purl). As a sample, use the top portion. Finished in 2.5-3 cm from the top and carefully sew the open loops to the fabric exterior surfaces. Sew the finished cap of the lining.
9
On the inside of the product enter the loop for the ears of the desired width and tie them to about 3 cm in height, the folding of the main working yarn in two layers. To round out every detail, from every side in every second row do the subtraction. All you have to subtract 8 times through the loop thus:

- make the edge loop;
- one loop, clear as if it was facial;
- follow-up front pull loop through removed.
10
All you have to do the finishing touches, and children's knitted hat ready. Lanka fold the elastic in half, wrap it inside the unit and sew neat stitches with a thread of the same color. At the ends of the ears do the ties – they can be crochet from the air chain and one row of simple columns. And you can see crochet bunches of soft acrylic yarn and braid them into thin braids. Make the knots and trim the ends of thread.