The candlesticks with their hands

Candle holder made of branches

Materials needed:

• beautiful branches;
• a drill with an attachment for cutting circles with a diameter of 3.75 cm.

Manufacturer:

For the selected branches mark with a pencil where you will cut out circles. Then put on goggles placed under branch plate for chips and make a round hole using a drill. Vacuum clean the branches from the debris and insert a candle in the hole.

Wooden candle holders with a picture

Materials needed:

• wooden cubes;
• stickers-circles;
• white paint;
• a drill with an attachment to cut round holes.

Manufacturer:

In the middle of the wooden cube bore a round hole the desired diameter and depth depending on the size of the selected candles. Then to the perimeter, pasted lapped round stickers. The bottom of the next candlestick painted with white paint in several layers. When the paint is completely dry, gently unstick the stickers and insert the candles.

Candle holder made of birch

Materials needed:

• birch stumps with a height of 10, 15 and 20 cm;
• a drill with an attachment for cutting circles with a diameter of 3.75 cm.

Manufacturer:

In the middle of the birch sticks drill a hole with a diameter of 3.75 cm clean the product from dust and insert the candle. You then associate the received workpiece by means of a rude rope. Candle holder made of birch, hand made, not only decorate the interior, but will last for many years.

Candle holder from a wine bottle

Materials needed:

• empty wine bottles;
• glass cutter;
• sandpaper.

Manufacturer:

Candle holders made from wine bottles, makes the perfect decoration for a romantic dinner. To make such decoration is very simple. First we need to clean used wine bottles by removing the labels. Then, using a special device designed for cutting glass, the intended cut line, and then put the bottle under hot water and slowly scrolling it. Next, repeat the procedure again, but this time under cold water. Due to the sudden drop in temperature the bottle should split on the planned line. After the bottom of the bottle is cut, it must be treated with sandpaper to keep it sharp.

Simple candle holder made from painted bottles

Materials needed:

• empty wine bottles;
• knitted openwork napkin;
• paint spray;
• newspaper;
• rubber seals.

Used wine bottles to use as candle holders for slim candles, simply by placing them in the bottle. To make this candle holder look beautiful and original, the bottle can be decorated with paint and delicate tissues. To do this, wrap a napkin around the bottle and sprayed the paint. When the paint is dry, carefully remove the cloth.

A candlestick from a silver bottle

Materials needed:

• the empty wine bottle made of transparent glass;
• masking tape;
• paint-spray silver color;
• liquid for washing dishes.

Manufacturer:

To start, we soaked the containers in soapy water for 30 minutes, then tear off the labels and allow the bottles to dry. Further along the spiral in the direction from the bottom to the neck glue masking tape and paint the bottles silver spray paint. When the paint is dry, unstick the masking tape and insert into the neck of the bottle a thin candle.

Candle holder from a tin

Materials needed:

• cans;
• roulette;
• drill;
• paint spray gold color;
• masking tape;
• aerosol adhesive;
• color carton;
• templates for numbers;
• scalpel;
• candles.

Manufacturer:

The inner side of the cans to seal the masking tape or close with cling film. Then painted with spray paint cans Golden brown. It should be done, holding the jar at a distance of 15-20 cm to avoid the formation of drips. If you want to get a more saturated color, then the paint should be applied in 2-3 layers.

When the paint is completely dry, printed on white paper figures and wrap her banks. Then use the drill for drilling holes along the contour of the figures. At the same time, the more holes you make, the more light through them will pass. For manufacturing these candle holders, you can use paint of any color and pattern will fit any other template. Alternatively, you can create an entire arrangement of cans with different patterns.

For the decoration of cans you can also use coloured cardboard. This cardboard must be placed in the jar, measure the width and height, then cut and glued to the outside banks by using spray-glue.

Candle holder from glass jar

Materials needed:

• glass jar;
• knitted cloth;
• scissors;
• hot melt glue for fabric;
• fusible gun.

Manufacturer:

Lace napkin cut to size-selected glass jars. Treated the seams with hot melt adhesive to fabric, to thread not blossomed. Then wrap the jar with a napkin and glue the seam.

Candle holder-circle of dough

Materials needed:

• dough;
• molds for baking in the form of hearts;
• metal blade;
• paper for baking;
• candle;
• paint, sequins, rhinestones, etc.

For the dough:

• 1 Cup flour;
• 0.5 cups of salt;
• 0.5 cups of warm water.

Manufacturer:

In a small saucepan, mix water, flour and salt until a homogeneous dense mass. Received divide the dough into four equal parts and spread on the baking paper. Each piece lightly and roll out cut out a heart, using a special mold. In the middle of a heart placed a candle and lightly presses to get the notch the right size. Procurement of test poison to be baked in the oven, pre-heating it to a temperature of 250 degrees. After three hours remove the hearts from the baking sheet using a metal spatula. When the dough has cooled, the candle holders should be painted with paint and decorate with sequins, rhinestones, ribbons, buttons and any other decorative elements. Salt dough can be prepared, the candlesticks of all shapes and paint them to suit any taste.

Candle holder pumpkin

Materials needed:

• pumpkin of small size;
• a drill with an attachment to cut round holes;
• candles.

Manufacturer:

Cut off the tail of a pumpkin, then in the center cut a round hole the same diameter with the selected candle. Remove the bones and the flesh of the pumpkin, and then insert the candle. The candle holder can be painted gold or silver paint, decorate with ribbons, sequins, rhinestones, lace, etc.

Candlestick of clay in the shape of a flower

Materials needed:

• polymer clay red or pink;
• small plastic egg;
• round wooden stick.

Manufacturer:

Polymer clay is a little mash in the hands to become soft and plastic, and then divide it into small pieces and roll out. Take a plastic egg and ableplanet it with clay to make a petal. Thus make a few more petals of different sizes and formed of them a flower. Ready-made candle holders from clay baked in the oven according to the instructions indicated on the package.