You will need
  • mezzanine:
  • - furniture Board;
  • - jigsaw;
  • - furniture screws;
  • - screws;
  • plastic guides;
  • glue "Moment";
  • - plywood or hardboard;
  • - metal corners;
  • roulette;
  • pencil.
  • Decor Cabinet doors:
  • - rattan fabric;
  • rail;
  • - the mitre box;
  • - hacksaw;
  • - furniture stapler;
  • roulette;
  • pencil;
  • - varnish or paint;
  • brush or roller.
Instruction
1
Mezzanine
Cut or Unscrew the feet from an old Cabinet, if any. You will increase the distance to the ceiling, useful area will be more. And wardrobe will be stronger to stand on the floor, as the load on it will increase.
2
Inspect the back wall of the Cabinet. If the old hardboard was rotten or cracked, replace it. Remove the dimensions and cut out a new heel. Fasten it with small screws or nail studs.
3
To make precise measurements of the new mezzanine. Saw out of furniture Board. The back part of the mezzanine made of hardboard (MDF) or plywood.
4
Collect all the parts of the mezzanine screws or metal parts.
5
Glue the plastic rails with glue "Moment". The doors themselves are cut out of plywood. Be sure to check that the thickness of plywood same as the width of the guides. The door must move easily in the grooves.
6
Treat mezzanine paints or pokleit Wallpaper. Color the outer part of the superstructure needs to match either with the Cabinet or with the Wallpaper to fit in an ugly spot.
7
Attach the unit to the top Cabinet with metal corners.
8
Decor Cabinet doors
Measure tape measure the Cabinet door. Put the sizes on rattan canvas. Saw off nozhovkoj with small teeths right amount of material.
9
Attach the fabric to the Cabinet doors with a furniture stapler. Rattan is not necessary to remove the old paint if it is not peeling off pieces or pojedina a bug.
10
Measure the door's perimeter and saw out the strips for the edging. Rattan cloth on the Cabinet work in the frame. Do the corners with the miter box - then you can easily meet.
11
Color strips in desired color separately if rattan canvas you plan to paint. If you will be all homogeneous, then attach a piece of wood and make it all one tone. Paint can with roller or brush. But if you are not afraid to splash the neighboring items - they are closed or do not exist, use paint or varnish in the can.