You will need
  • - pillars,
  • construction or any other material for walls,
  • capacity,
  • - TES,
  • - shower mixer,
  • - iron or flat slate to cover the roof,
  • sewer pipe,
  • cement,
  • - sand,
  • - crushed stone,
  • - nails.
The main building a summer shower is to install strong pillars, make sheathing the roof and put it in the container. Walls can be covered with anything, even just a cellophane or cloth.
For setting posts, dig the four holes. If you put poles wood, protect the wood from rotting with water resistant primer and mastic over apply. Wrap the poles with tar paper, exactly install, check plumb your installation. The holes around the pillars fill with fine gravel and tamp thoroughly.
Dig inside the posts small indentation around the perimeter of the shower. Install drain pipe, which can be displayed in a separate pit or just put in a nearby ditch. Install formwork and zacamintului the bottom with cement mortar. For making mortar mix one part cement, 3 parts river sand and three parts gravel. Before you pour, pour down a few buckets of gravel, flatten and fill. Do not forget to plug the pipe plug and immediately remove her to the solidification of the solution.
Install the sheathing on the poles. It should be at the top, bottom and middle. On the roof make the crate, the coating of iron or a flat slate. In the roof leave an opening for supplying water from the tank to shower the mixer.
Close the sides the soul of materials. As mentioned above, it can be any materials at your discretion and according to your capabilities.
Do in the shower floor. It needs to be slatted so that water flowed well. Instead of floor to install a shower pan if it is left of the old, unusable shower stall. Sump you just need to attach to a drain pipe with corrugated hose and clamps.
Install on the roof of the container. It is better to pre-painted black for better heating of the water.
At the bottom of the tank must have an opening on the thread, which is screwed on the shower mixer. If the tank top no cover, then you need to make a hole to insert a pipe to join the hose for filling the tank with water. Very convenient if the pipe is withdrawn to the available distance for convenient connection of a hose. In this case, there is no need to climb in order to fill capacity.
A summer shower can't build your own, and buy a ready capacity, and all attributes. Currently available are a huge range of summer showers at a very affordable price and excellent quality. They provided extra heating and discharge of warm water to additional places, like to the summer wash basin or kitchen sink.