Advice 1: How to disable software update

To disable the automatic update of all programsinstalled on computer that is running Windows, one function impossible. Configuration updates are performed in each of the programse separately.
How to disable software update
Instruction
1
Disable automatic updates the standard Windows Media Player application. To do this, access the main system menu by pressing the "start" button, and navigate to the Run dialog. Type regedit in the Open box, and confirm the utility of the registry editor by clicking the OK button. Expand the branch HKEY_LOCAL_MACHINESoftwarePoliciesmicrosoftwindowswindowsmediaplayerи create a new value of type REG_DWORD with the name DisableAutoUpdate. Set the key value to 1 and save the changes.
2
Adobe Reader does not disable automatic updates in the settings menu, so in order to get rid of frequent updates will need to perform this procedure manually. When the label updates of the programsyou cancel it and start Adobe Reader. Open menu "help" the service window panel, programss and select "Check for updates". Wait for the check and open the link "Settings" popup window. Uncheck the line "Automatically check for Adobe updates" and "Adobe Reader" under "Choose application to update". Confirm saving the changes by pressing the OK button.
3
Windows Update in Windows version 7 is responsible for the automatic updating system. If necessary, this feature can also be disabled. To do this, return to the main menu "start" and click "control Panel". Expand the "security Center" and select "Automatic update". Apply a check mark in the line "Disable auto update" dialog box and save changes by clicking OK. Please note that system updates affect system performance and may contain correct errors, so disabling this feature can not be recommended.

Advice 2: How to cancel updates for the program

Operating system updates are a good opportunity to upgrade the currently installed programs free, to increase the security of the system and to stabilize its work. So say the developers of one of the most commonly used operating systems on earth.
How to cancel updates for the program
Instruction
1
But there are times when to enable the system to communicate with servers is not appropriate. To fully undo the update Windows go to "start menu". Click "control Panel". Further actions depend on the version of your Windows.
2
If you have Windows XP, in control panel select Automatic updates. Double-click on this tab and a new window will appear with options and settings updates. In this window you need to choose one of four positions: - automatically (the updates are always downloaded and installed automatically, without the user's help); - install updates automatically, but give the user a choice of installation time; - notify the user but don't download and install updates automatically; - disable fully automatic updates system.
3
In order for your system was not updated, i.e. to disable updates, select the last item. Continue your operating system will not automatically receive updates until, until you change these settings. In the "control Panel" in Windows Vista and newer versions you need to choose a special item "Windows update". In the next window you will be available to some teams. Select "customize settings".
4
A new window will open, where you can select the update mode of the system from the list (similar to the list in Windows XP). It is also possible to cancel or set the ability to download recommended but not mandatory updates. To disable automatic updates in the list select "never check for updates". Clicking "OK" you confirm your choice.

Advice 3: How to disable the updates on the computer

To ensure the stability and security of its work, the vast majority of operating systems are constantly updated. The update is performed in the background and does not affect the operation of the user, however, spends a significant amount of traffic, which can be quite expensive. If necessary, download and install updates, you can disable it.
How to disable the updates on the computer
Instruction
1
Question about the activation system download and install automatic updates is set to the user during installation of the operating system on one of its last stages. The simplest way to disable the updates on the computer - give them straight during installation. To do this, select the "Never download or install updates". This will help you to get rid of excess cost of Internet traffic, however, the system will remind you that computer security is under threat and that update is enabled.
2
Previously involved and used the option to upload operating system updates, you can disable it by standard means. Go to the start menu and press the right mouse button on the icon "My computer". In the opened context menu select "Properties". In the dialog that appears go to the tab "Automatic updates" and tick the box next to "Disable automatic updates". This action will finally sever the connection between the computer and the update server developer.
3
Click "start" and go to "control Panel". Look for the icon "Automatic updates" and click it twice. The dialog box, as described above. It should also select "Disable automatic updates".
Useful advice
Whenever you have the opportunity to use unlimited Internet, download and install updates to the operating system. This will help to protect it from all sorts of threats and in General will speed up its work.
Do not turn off the updates completely. Make sure that the system notify you when the next updates. Thus, you will be able to choose the most important to download and install them. Thus you save bandwidth and will keep the system safe.

Advice 4: How to cancel auto update Windows

Automatic update of the Windows operating system is required to assure its reliable operation. However, many users prefer to disable automatic update immediately after installing the operating system.
How to cancel auto update Windows
Instruction
1
It is no secret that Windows operating system many different vulnerabilities. Every time information about the hackers found a vulnerability enters the network, Microsoft released on her "patch", closing a loophole was found. Thanks to Windows automatic updates, all detected vulnerabilities are quickly closed.
2
Despite the usefulness of automatic updates, many users disable it after Windows installation, for example, in the case of using an unlicensed version of the operating system and the associated fear. Disabling automatic updates is quite simple and takes very little time.
3
If you are using Windows XP, open "control Panel" (start – control Panel), select "Automatic update", double-click it with the mouse. In the opened window select the option "Disable auto update", click "OK".
4
Even when updating is disabled, responsible for updating the service continues to run, consuming system resources. It is better to turn off: again, go to "control Panel", select "administrative tools", then "Services". In the opened window, in the list of services, find "Automatic update", double-click it with the mouse. A window will open, there click "Stop". After stopping the service (it takes a few seconds) select the line "start Type" option to "Disabled."
5
The procedure to disable automatic updates in Windows 7 is very similar. Click "start", choose "control Panel", then "Security" tab. Find the "Windows update" and choose the option disable. As in Windows XP, after disabling automatic updates should go to Services and disable automatic updates.

Advice 5: How to disable automatic software update

The solution of the problem disable automatic updates of randomly chosen programs is the use of "Disable autoupdate" in the menu "Settings". Disabling automatic updates in Microsoft Windows operating system is discussed below.
How to disable automatic software update
Instruction
1
Click "start" to bring up the main menu system and navigate to "control Panel" to perform the operation of disabling the automatic updates feature in Microsoft Windows operating system.
2
Select "security Center" and open the link "Windows update".
3
Select the node "settings" in the left pane of the resulting window update center and select "never check for updates (not recommended) in the drop-down list under "Important updates".
4
Click OK to confirm apply your changes and return to the main menu "start" to perform the operation of disabling a service wuauclt.exe responsible for frequency of checking for system updates.
5
Open the link "control Panel" and click "Performance and maintenance".
6
Select "administrative tools" and expand "computer Management" double click the mouse.
7
Select "Services and applications" in the left pane of the new dialog box and open it by clicking on the " + " icon , located next to the row of the selected group.
8
Point to "Services" and expand the "Automatic update" in the right pane of the dialog "computer Management" double click the mouse.
9
Click on the tab "General" dialog box "Automatic update" and click "Stop" in the line "Condition".
10
Select "Disabled" in the dropdown menu "startup Type" and click the OK button to execute the command.
11
Restart the computer to apply the selected changes.
Note
If the service file wuauclt.exe is in any folder except C:\Windows\System32 and C:\Windows\prefetch the system may be infected with a virus.
Useful advice
The shutdown of the service wuauclt.exe only the application Manager will automatically restore the service if the automatic updates is not disabled.

Advice 6: How to disable Word correction

In a Microsoft Office Word document, the word "correction" can mean two functions. AutoCorrect - if the user enters a word with errors, the program automatically corrects it to the correct option. Correction when you edit – tracking all changes made to the original document. Turn off these functions in different ways.
How to disable Word correction
Instruction
1
AutoCorrect works when in settings you select "Automatically correct spelling errors". The option to replace any word that the program recognizes as a wrong, is in a special list. On the one hand, this feature is useful, but sometimes there are glitches: correctly entered word is recognized incorrectly.
2
To remedy the situation, do not have to disable the feature. Click on the Office button in the upper left corner of the window. Select the bottom menu item "Word Options" opens a new dialog box. Click it into the category of "Spelling." Click on the "AutoCorrect Options" in the same group.
3
Additionally, in the opened window locate the word (or words) for which the AutoCorrect mode to apply is not necessary. Select it using the left mouse button and click on the "Delete" button at the bottom of the window. If you do decide to completely disable the AutoCorrect feature, click to clear the marker from the field "Automatically correct spelling errors" and save the changes.
4
If your document shows all the changes made by you or other users in the text should refer to the tools on the control panel. Open the tab "Review" and make any correctionsalready made in the document. To do this, under "Repair" click on the arrow under the thumbnail to "Accept". In the context menu select "Apply all changes in document".
5
After that disable the fixes. On the tab "Review" in the "Tracking" section, click on the thumbnail to "Fix". When this mode is enabled it is highlighted in a different color, in the inactive state no different from the rest of the buttons of the thumbnail toolbar. Save the document.
Search
Is the advice useful?