How to build a toilet with their hands

At the cottage or in the yard of a private house, toilet on the street just need. Spending a small amount of effort, time and building materials, you can easily build it yourself. From wells and drinking water wells toilet should be located at a distance of 30-50 meters. Take into account the depth of the groundwater table. If they are above 2.5 feet, the toiletand the need to equip the container and as filling to remove. When the depth of groundwater below 2.5 meters, you can dig a cesspool.

You will need

-carpentry tools
-TES
beams or posts
-material for roof cover (iron, slate, roofing material)
-material for covering the sump
-nails or screws

Instruction

Dig a cesspool. To dig it by hand or tractor bucket. The pit must be deep enough so that the toilet has served one year.
If you have soil prone to obsypayu, the bottom of the sump and the sides need to cement. To do the formwork and pour cement mortar. Possible side to straight sheathing or slate boards.

Above the cesspool put reliable coverage. It can be made of timber, thick logs or iron pipes.

Make a frame for the toilet. For this kopite wooden poles, pre to isolate them from the ground. The height and width with the length make according to your desire. The rear part of the make posts shorter than the front. To with the roof dripping rain water.

Bottom frame nail boards. Installing a toilet on the floor he needs to heel so that he stood firmly and steadily.

Panel frame with boards. TES is better to take with grooves to avoid cracks. If you take the planks without grooves, the panel joints of boards in addition.

Sheathing the roof, let's get TES back and forth. In order to have a visor, and behind the rain water flowed away from the toilet. Cover the roof with roofing felt, slate or iron.

Lay the floor. It needs to be a hole. The size of the hole cut out at your discretion.

Hang the door. Fasten it to the handle. All toilet ready.

Is the advice useful?