How to remove the overclocking of the CPU

There are several main methods of disabling the overclockingand the CPU and other elements. Open the BIOS menu by pressing the right key once turning on the computer.

Click Set Default BIOS or Use Default Settings. Press the Enter key. After the appearance of the new window, press Y. thus, you confirm application of the source operating parameters of the computer.

Disadvantage of this method is that you disable the acceleration for all other devices. If you need to change only the parameters of the CPU, open the Setup menu Advanced or CPU Settings.

Select menu, which displays settings of the CPU. Go to Overclocking Options, and enable Auto or Default.

If you have not used a given acceleration profile, and set the options you want, change the indicators of bus frequency and multiplier by selecting the original value.

In some models of mobile computers cannot modify the operating parameters of the devices via the BIOS menu. If you are faced with a similar problem, install any software that allow you to control the CPU, working in Windows. An example of such a utility can serve as a CPU Core.

Run this program and select the default multiplier and bus frequency. Lower the voltage supplied to the processor.

If incorrect parameters of dispersal has led to the fact that the computer simply does not boot, you must use a mechanical reset. Power off your PC and disconnect the cable from the power supply.

Disassemble the computer case, thereby obtaining access to the system Board. Remove the BIOS battery from the slot. Jumper the contacts and replace the battery in its original position. This procedure will lead to a complete reset of the BIOS.