You will need
  • - two straight or circular needles;
  • - auxiliary needle;
  • - working yarn;
  • auxiliary thread;
  • needle;
  • - iron.
Tie a rubber band right height on the forward and reverse or circular rows. When the bar is completed, finish the job. This requires the final number of elastic or textured cloth to perform according to the pattern (over facial – facial over purl – purl), and simultaneously close loop gum.
Provarite edge and a subsequent front loops together with a front. Formed on the right side, the needle loop transfer again on the left needle; again provarite subsequent neighboring thread bow together. If after removed the front loop should be reverse, do not the obverse, and the reverse loop.
Continue to close the last row of gum at the described specimen, while the edge of blade is not formed neat plaited loops-links. They should all be exactly the same.
Try not too long closing loop, not to pull the canvas. This not only deforms the rubber, but also deprives its elasticity. For convenience, it is recommended to finish the knitting gum spokes, more on one room than the main working tool. And below edge of gum was not sloppy stretched, close the front loops for the bottom wall and always follow the pattern.
Try to perform an elastic band sewn strap. You need to associate an elastic strip or embossed with the required height, and when working on the final series of bands (there may be from two to four) to introduce additional thread. At the end of the strip without removing the locking threads, carefully zautyuzhte the last row of open loops.
Remove the thread and sew the elastic band to the main product cattalini seam (stitches are "snake" through the open loop of the last row). If you finish the elastic will thus result in a beautiful scalloped edge.
If elastic fabric is the initial stage of the knitting large components (e.g., backrests, shelves, legs or wide sleeves), you may need to finish the last row with uniform additions of loops. This extends the subsequent knitting. In this case allowances are made of broaches, that is, the cross threads between adjacent loops.