How to make an owl of the disks

Nine junk computer disks quickly turn into an adorable owl. This hack you can leave yourself or give a loved one. The process is fascinating. After a good work you will surely want to make a second.

Preparation of the necessary

Put everything you need near each other. When all you need at hand, it goes faster. Here's what you'll need:

- 8 bright and one dark disk;
scissors with padded finger holes;
glue "Moment";
- ballpoint pen blue color;
yellow and black cardboard.

The process of manufacturing the head

Take 2 drive light color. They should be silver on both sides. Picture labels will not fit. Scissors to make "fringe" on the edges of these discs a depth of 1 cm this Process is not easy. In order not to grate your fingers, you can wear cloth gloves. Rescue and scissors, which have soft openings for the fingers.

Once you have made fringe on both drives, will put them to the side. Take the yellow cardboard. Cut out 2 identical circles. This is owl eyes. They should be of a size to close the hole in the disc and eagle around it. Made of black cardboard cut out round pupils. Naturally, they are less eyes.

Glue the pupils in the middle or closer to the edges of the yellow sockets. Depends on what kind of expression will have owls made of the disks.

Put one prepared to drive on the other a little overlap, going to second on 2-2,5 see the third light, Take a drive. Also scissors make fringe all the way around. This is the head. Put it on two disks with big eyes so that it stuck out from under them at the top and bottom.

Dark disk

Now, take a dark or colored disk. Draw on it in the form of drops in the beak of the owl. It stick on the bottom of the head tip down. Small triangular ears, eyebrows bird is also cut out and glue into place.

Draw on the same disk as the foot of the owl. Upstairs are semicircular. Downstairs they have 3 pointy finger. From the remnants of the disk cut out 2 oval wing. Scissors make the edges of the fringe. They will be useful later.

How to gather all the details

Will have to work a little more with scissors. Take 5 light discs. The edges of two of them cut in the form of fringe completely. In the following two make the fringe for the half of a circle. The last five make a fringe only a quarter.

It lay in the middle, cuts down. Top right, place the one with the undercut edge at the half. Fringe looks strictly to the right. Fringe is directed to the left third, also decorated disk. He comes in second by 1 cm with respect to the first, both disk are symmetrically arranged.

Also symmetrically glue the remaining 2 disk, marking their edges to the middle of the previous two. Each other they come to 3 cm from the Top in the middle, glue the head, sides, wings, bottom of feet. Owl of the disks ready.