How to wash Teflon tablecloth

Teflon tablecloth is quite popular among Housewives, and not only because of its practicality but also due to the visual appeal. It is typically used as a table covering – his special impregnation resistant to moisture and dirt. Teflon is applied on a colored woven base (linen, polyester, cotton, etc.), which did not lose richness of color. The product is easy to care for, and often you can do wet cleaning. Sometimes, however, cloths may need washing.

You will need

• - a sponge or a rag;
• - wooden spatula;
• - Laundry soap;
• all - purpose cleanser;
• - washing machine;
• - washing powder;
• - iron (in extreme cases).

Instruction

1. Try to clean stained Teflon tablecloth without removing it from the countertop. Carefully wipe it with a damp sponge or cloth; if necessary you can use soap or detergent. Remove all traces of soap scum, regularly moistening the sponge in clean water.
2. Soak the dried dirt, then carefully scrape them from the surface of the tablecloth with a wooden spatula. Muddy puddles pre-blot with a tissue and finished cleaning the table.
3. If, after a damp cleaning cloth on the surface remained stubborn stains, wash the product by hand in a solution of detergent or soap. Such things are generally well satisfied with this content. Ensure that the temperature of the liquid was not higher than 30-40 degrees!
4. To wash Teflon tablecloth should carefully, trying not to make creases on it. Cleaning products all the spots, in no case do not remove it before drying. Enough shake table cover over the bath – this will help to smooth out wrinkles and remove excess moisture.
5. For washing tablecloths with Teflon impregnation in an automatic washing machine you should choose gentle treatment; the optimum temperature of water when hand-washing. Spin must be disconnected.
6. Hang the washed product over the bath to drain the water, and dry it in the expanded state at room temperature.
7. Try not to iron the tablecloth, so as not to damage the Teflon. To achieve this pretty simple, because with proper care, these products almost does not crumple. Nevertheless, if the need arises, walk on the wrong side of the table cover is not very hot iron. It should not be too strongly pressed a heated sole to the fabric surface.