By EasyHow

How to make stall

Starting a business, everyone wants to save money, and it is quite reasonable. One of the ways to save when opening the kiosk is a self-built room. To make myself a stall, you need to know some points.

You will need

metal pipe;
- galvanized sheet;
- DSP;
- polystyrene;
- other construction materials in your usmotrenie.

Instruction

The easiest and cheapest stall – welded frame. For its construction you first need to install the frame. The best material to provide a metal pipe, because the other materials (steel channel, profile) will not provide your stall desired strength.

Now, notice at the bottom of the frame, it will be three-layered. It should be lined with any moisture-proof material: galvanized sheet or rubemast. This is necessary to protect the interior from the harmful effects of moisture. The next layer is chipboard, and the third layer is a coating of your choice.

Then the finished frame should sheathe. For plating, you can use galvanized sheet metal. It can also be used as a material for roofing.

For furnish of internal premises it is best to use chipboard. Insulation material for the kiosk serves as polystyrene or mineral insulation – it will protect from moisture and cold.

The door of the kiosk should also have a thin layer of insulation to avoid draughts.

Showcase kiosk can be made of double glazing. Make sure you close the metal shutters. This way you will protect your kiosk from unexpected guests.

Now that the booth is done, the most important thing is to conduct electricity, install sockets, switches.

Note

To install the kiosk needs some distance from the ground to isbit moisture and freezing. For this approach the concrete blocks or a small brick Foundation.

Useful advice

The kiosk can bind not only galvanized steel sheet, but also panels made of PVC (lining). Both materials possess durability and strength.

As floor coverings you can use corrugated aluminum sheet or linoleum.

Corrugated sheet is a durable material, resistant to all kinds of influences, hi-tech.

Linoleum is unbonded and base. The first option has good moisture resistance and low price. Linoleum on the basis of more expensive, but at the same time much stronger.