You will need
- - building level,
- pencil,
- - screws
- metal profile
- - drill
- - screwdriver
Instruction
1
Define the space where will be located your dressing room
If your house has a storage room is the perfect place for dressing rooms. If storerooms are not under dressing can highlight part of a room or hallway. For example, the dressing room will be very convenient and appropriate in the bedroom. If you have an attic room, it is possible to place a closet there. Simply put, everything depends on the layout of your home.
If your house has a storage room is the perfect place for dressing rooms. If storerooms are not under dressing can highlight part of a room or hallway. For example, the dressing room will be very convenient and appropriate in the bedroom. If you have an attic room, it is possible to place a closet there. Simply put, everything depends on the layout of your home.
2
No matter which of the areas you have identified under the dressing room - it is necessary to ensure that there was good ventilation and lighting. If necessary, you can change the flooring and replace or install the door.
3
Select a material for walk-in closet
For dressing devices suitable chipboard, planks, or plywood.
For dressing devices suitable chipboard, planks, or plywood.
4
Develop a drawing of the walk-in closet
Check the walls and floor are reserved for the closet space using a level. Make all the necessary measurements. Measurements need to be removed in three places, each of the walls: the ceiling, the floor and halfway up the wall. Make a drawing of your walk-in closet. Drawing it is recommended to do using special computer software or on graph paper so as to be able to enter all the details of your wardrobe. When compiling the project, you need to make hangers, shelves, rails, baskets and drawers. To develop drawing, you can use the existing projects of the wardrobe (just look online), or to design it yourself, based on your preferences and the amount of things you plan to store in the closet.
Check the walls and floor are reserved for the closet space using a level. Make all the necessary measurements. Measurements need to be removed in three places, each of the walls: the ceiling, the floor and halfway up the wall. Make a drawing of your walk-in closet. Drawing it is recommended to do using special computer software or on graph paper so as to be able to enter all the details of your wardrobe. When compiling the project, you need to make hangers, shelves, rails, baskets and drawers. To develop drawing, you can use the existing projects of the wardrobe (just look online), or to design it yourself, based on your preferences and the amount of things you plan to store in the closet.
5
Prepare parts dressing
There are two ways to solve this problem. You can find the woodshop and agree that you did the cutting of materials, in accordance with the details of your project. And you can arm saw, planer and jigsaw, and to make the cutting materials on your own.
There are two ways to solve this problem. You can find the woodshop and agree that you did the cutting of materials, in accordance with the details of your project. And you can arm saw, planer and jigsaw, and to make the cutting materials on your own.
6
Mark the fixing points and drill holes in the walls. Fasten vertical wall, and then the top shelf. Installation of the Assembly is done from the top down.
7
After Assembly, wipe all parts with a damp cloth and install the plinth.