You will need
- pliers, screwdriver
Instruction
1
Replacing the drain hose to the machines Ariston , Indesit, Hotpoint , Samsung , Beko, LG, Candy , Bosch
In this type of washing machines access to the drain hose possible through the bottom.
Disconnect ground bar, drain remaining water and remove the filter. Then, loosen the bolts which fasten the "snail" and remove it from the vehicle's hull. Loosening the clamp with a pliers, disconnect the drain hose, first from the drainage system, and then from the body. Connect the new hose and assemble the machine.
In this type of washing machines access to the drain hose possible through the bottom.
Disconnect ground bar, drain remaining water and remove the filter. Then, loosen the bolts which fasten the "snail" and remove it from the vehicle's hull. Loosening the clamp with a pliers, disconnect the drain hose, first from the drainage system, and then from the body. Connect the new hose and assemble the machine.
2
Replacing drain hose of washing machines Zanussi and Electrolux
In this type of washing machines access to the drain hose is possible only through the back panel of the machine.
Remove the screws located on the back of the car, and remove the top cover. Remove the mounting bolts of the rear wall. Then, detach the fixing inlet valve and remove the back wall of the machine. Drain excess water. Loosen the clamp and disconnect the drain hose from the drain system and the case.Connect the new hose and assemble the machine.
In this type of washing machines access to the drain hose is possible only through the back panel of the machine.
Remove the screws located on the back of the car, and remove the top cover. Remove the mounting bolts of the rear wall. Then, detach the fixing inlet valve and remove the back wall of the machine. Drain excess water. Loosen the clamp and disconnect the drain hose from the drain system and the case.Connect the new hose and assemble the machine.
3
Replacement drain hose for washing machines Bosch, AEG and Siemens.
In this type of washing machines access to the drain hose possible through the front wall.
Remove the clamp and disconnect the cuff of the hatch from the front wall of the machine. Remove the detergent dispenser. Disconnect the lower decoration panel and drain excess water. Remove the bolts and remove the front panel Disconnect the wires from the hatch lock. Clamp with mounts the hose, disconnect the hose from the drain system and body, and take him outside. Insert the new hose and clamp it with the clamp. Guide the hose along the walls, attach to the body and out.
In this type of washing machines access to the drain hose possible through the front wall.
Remove the clamp and disconnect the cuff of the hatch from the front wall of the machine. Remove the detergent dispenser. Disconnect the lower decoration panel and drain excess water. Remove the bolts and remove the front panel Disconnect the wires from the hatch lock. Clamp with mounts the hose, disconnect the hose from the drain system and body, and take him outside. Insert the new hose and clamp it with the clamp. Guide the hose along the walls, attach to the body and out.
4
Replace drain hose on washing machines with vertical loading.
In this type of washing machines access to the drain hose is possible through the side wall.
Remove the bolts, slide and remove the side panel. Loosen and remove the clamp, disconnect the hose and pull it out.
In this type of washing machines access to the drain hose is possible through the side wall.
Remove the bolts, slide and remove the side panel. Loosen and remove the clamp, disconnect the hose and pull it out.