You will need
- Vacuum cleaner, work clothes, gauze for mouth and nose, goggles for soot sponge or chemical sponge, newspaper, plastic film, warm water, a degreaser, a sponge, white spirit.
Instruction
1
Vacuum the spot. Do not RUB the stain soot vacuum cleaner brush! Keep it at some distance from the spot.
2
Lay a paper on the floor where it is to pour soot. For soot sponge or chemical sponge wipe the stain consistently, stripe for stripe.
3
When soiled, sponge, slice off the dirty layer and continue with the cleanup. The sponge should not be wet, it should be dry.
4
Remove the paper and lay it instead of plastic wrap.
5
Dissolve in warm water degreaser, rinse in the solution of a simple sponge. Scour the stain of soot in it.
6
Then rinse the solution from the surface with warm water and wipe dry. If the soot stain is not washed up, repeat the procedure several times.
7
If after the above procedures, the stain is not otterlei, treat the soot stain with white spirit. White spirit should be applied on a cotton swab (cotton wool, wound on a wooden stick). The ear stick is not suitable, because the white spirit can soften plastic. In no case do not RUB. Easily roll the swab on the stain.
8
If the above methods do not help, contact your specialist or mask the stains. At this place you can hang a picture, photo or plate. Will also help redecorating. If the walls are painted, it is necessary to cover the stain with sealant, resistant to stains, and then apply a coat of paint. Will have to repaint the entire wall.