You will need
- -the plunger
- -the cable or hose hard
- -chemicals
- -soda and vinegar
Instruction
1
When you call a plumber from the housing Department all the problems you pass on to him. So do most people who don't want to burden yourself with additional problems. Problem after sewer cleaning a plumber there is only one – launder all soiled in the process of cleaning.
2
If you find the formation of congestion in the sewers, and ceased to merge water pipe, use a plunger. It needs to be completely submerged in water. Do some vigorous pumping. If that doesn't work, you will have to fill chemical means to eliminate blockages.
3
Pour or sprinkle chemical agent in accordance with the instructions in the manual. After a certain period of time fill the pipe with hot water and again pump plunger.
4
In a situation where the chemicals for cleaning sewer pipes was not on hand can fill the pipe full of 200-300 grams a Cup of baking soda and pour a bottle of 70% vinegar. Starts the reaction of soda with vinegar, which manifests itself in a rapid boil. It usually helps to get rid of fat blockage.
5
Before use by all means try to remove and clean the siphon. Even that is often enough to water easily began to flow down the pipes.
6
If everyone is that desperate, use the cleaning by using plumbing wire. You can try cleaning the tight hose, when the lack of cable.
7
With a strong clog of Sewerage system one of these tools will help for sure.