You will need
- - Hairdryer
- - gasoline;
- - white spirit;
- - acetone;
- - wash tubs, dishes, Windows, etc.;
- - eraser;
- - rags or wool.
Instruction
1
First try to separate the strip of adhesive tape. Inset the tip and slowly pulling, tear off the entire plate. If separate tape this fails, take a hair dryer and warm the surface. The glue will melt and strip (both paper and film) will easily separate.
2
Before you start to remove traces of glue on the surface, check the effect in an inconspicuous area, as some compounds may dissolve the paint or damage the surface. For example, can corrode the paint, petrol or white spirit, and a tool containing abrasive, can damage the smooth surface of plastic Windows.
3
Soak a cotton wool or a rag with a liquid lighter refills (purified gasoline), white spirit, acetone, cleaning (for example "Mr Muscle" or "because he gel") and wipe the surface where it was glued tape.
4
Do not hold cleaning fluid for a long time, so she did not have time to damage the surface. Immediately wipe it with a rag or napkins dry. Be sure to wipe the entire surface, even if adhesive residue is not visible – they will attract dust and be covered with bloom.
5
If you need to remove quite a large number of traces of Scotch, purchase a special fluid for removing labels or cleaning office equipment. Apply it on the surface and wait a few minutes, then erase all traces with a cloth.
6
To increase the washing effect, first wipe the sodden traces of glue with a sponge dipped in alcohol. Then dry rags, wipe dry.
7
If you fear for the safety of the surface, try to erase the traces of adhesive with a solid eraser. Can combine: wipe with acetone, wait for drying, RUB with an abrasive (an eraser or fine sandpaper), and then remove with a rag soaked in alcohol.