You will need
- - mesh netting;
- metal or wooden poles;
- - metal cable;
- - wooden stakes;
- cord;
- - gravel;
- - sand;
- - shovel;
- - nails or staples;
- - hammer;
- metal hooks or clips
- welding machine
Instruction
1
Measure the borders of the plot and count the number of consumables. It is necessary to drive wooden stakes at the corners of the plot and pull them around the perimeter, cord. Measure the length of the cord - it will match the required length of mesh netting. Calculate the required number of posts, based on the fact that they must be installed with an interval of 2,5-3 meters.
2
Select the mesh netting. Note that the width of the grid should correspond to the desired height of the fence. To install the temporary fence you will approach the mesh of black wire. Its price is considerably lower. But if the design will be used for a long period of time you need to buy a more expensive ocynkowany option. A fence made of such material can last more than 20 years.
3
Install posts. To do this, dig a pit depth of one meter. Pour the gravel and sand on the bottom of the pits and carefully tamp. Install posts and fill the holes with soil, tamping it.
4
Install a roll of mesh fencing around the corner post and secure it the edge. If you purchased a non - grid - pick up the edge at 5-10 cm above ground level. To ensure that the mesh is securely held on the metal poles, it is recommended to weld the hooks to them. Another mounting method is to use a special pipe clamp. Of course, you can do much easier and bind the mesh to the posts with wire, but this mounting option is much less reliable.To attach the mesh to the wooden posts you can use special staples or nails.
5
Carefully unwind the coil, pulling the mesh, and attach it to next post. Pull the metal cable at the bottom and the top of the net and fasten its ends to the pillars. This technique allows to avoid sagging of the mesh netting. Make a fence around the perimeter of the site, using the same method.
