How to set digital television

Today, more and more countries switch to digital TV. If you have the opportunity to watch digital television today – you're in luck. Your main task is to customize your home TV on the adoption of digital channels. If a non-numeric, when the transition to digital broadcasting, he ceases to receive analog signals. If you have digital TV will need to be reconfigured to select a new channel set. Your favorite cable and satellite channels will not be affected.

You will need

• Cable digital TV tuner with cable, remote control and connecting an RCA audio-video cable.

Instruction

1. Setting up digital TV set for the respective channels is to change the indicators in digital tuner of your TV. The tuner is needed to decode digital TV channels to view on TV. Manipulation will be a little, you can do it.
2. To begin with, you need to remove the cable from the TV tuner from the packaging and check its integrity. In the remote control insert a couple of AA batteries in the correct polarity. Connect the cable from the antenna: at the end there is crimp or screw on F-type connector to the RF in (Ant in) that you want to pin to the input switching panel located on the rear of the TV tuner.
3. Guide connecting an RCA audio / video cable between the TV and the tuner. The connection to the tuner and TV connectors must be carried out in accordance with the color layout. Now you need to turn on the TV and a digital tuner, switching the required input, for example TV/AV.
4. Select on the remote to the TV tuner unit "Menu" and then to "auto search channels" and "OK". Your tuner will immediately begin the enumeration of the channels. When the automatic search has finished, you will see a list of channels found on the screen. Again click "OK" on the remote control. To exit the "Main menu", locate the cursor to the line "Exit" and "OK" or press the "Exit" button (Exit) on the remote control . The TV tuner will display on the front panel channel number.
5. You can search channels manually: choose "Menu" subsection "Manual channel search". Function "Reset channels" will remove all previous settings of the channels. You can even sort channels, group lists, or to transfer the channel to another number. This is done via the option "Sort channels". Every innovation confirm with the "OK".
6. If you want to watch the electronic program guide (EPG), press "EPG" on the remote. The screen will display 2 lists: at the top of the list of channels below is the list of gear for your favorite channel. To navigate the list, use the control buttons on the remote control "up" "down". To exit the menu "EPG", press "Exit" on the remote control .