Instruction
1
Prepare the room for work. For this restelica around the perimeter of the floor plastic wrap and place on film. Take a bucket of warm water and a roller on the large handle or broad brush.
2
Carefully DAB all walls and ceiling, not missing sections. To do this, put the roller or brush in water and swipe them at the processed surfaces. At the same time, producing such works often change the water in the bucket. In addition to the brush or roller and can also be used a special spray.
3
Take a scraper and begin to remove the chalk, scrape it in places where it is most some dry. In the process of purification does not stop work on the dipping. Best of all, when one person gets in the water on the walls and ceiling, and the other scrapes the old chalk.
4
After the top layer of lime removed, take a stiff spatula and remove the excess chalk, where they are available.
5
Will wet our brush, a sponge or any cloth large size in warm water and wipe the surface of the ceiling or walls after removal of the whitewash. The sponge should not be twisted, the cloth should be liberally soaked with water. Often change the water, it should be relatively clean so as not to dirty the surface.
Note
Reasons for refusal to whitewash the material of interior decoration may be many, but the most important is that, by touching walls, you not only get dirty yourself, but will render useless his clothes, in addition to the surface where you use chalk, you will not be able to glue Wallpaper without removing the previous layer or to apply the paint.
Useful advice
If by washing the lime fell on the wooden floor, it is necessary to prepare a solution of water with the addition of a few grams of sunflower oil and RUB this solution space pollution.
