You will need
- - screwdrivers;
- epoxy resin;
- - the bandage;
- film;
- - lining.
Instruction
1
Remove the torpedo. For repair works panel must be removed. Read the user manual of your car. It should be described the process of removing. You should also visit the forum owners carnd your model. There you will find not only a description of the removal process, but all of the pitfalls that should be afraid of.
2
Remove all overlays. Unplug decorative pieces. Also remove the steering wheel. If the glove box is removable, can be removed and it. The removal of the subject and the paddle shifters.
3
Find the location of each screw securing the panel to the vehicle body. Carefully remove the pre-proporcional.
4
Gently pull the torpedo into himself by placing hands on the edge. In any case, do not pull too strongly! On the back side, locate all the pads the wires. Label them and disconnect.
5
Remove the torpedo from the car via the front passenger door. Perform a full disassembly of the panel.
6
Examine carefully for damage, if necessary repair. Cracked or wretched panel it is best to replace with the new one. If this is not possible, you will have to restore the old.
7
Carefully inspect the place of fracture or cracks. Try to straighten all the pieces of plastic so that they form a flat surface.
8
Flip the panel face down. From the back side with epoxy and conventional bandage fix cracked plastic. Carefully over everything with epoxy. Allow to dry the resin.
9
Mask the place of the fracture from the front side. This can be used as lining, so the tape of any color.
10
Drag the torpedo a film or material, if you want to radically change her style. Best use of a car skin or a special film. Such materials are well adapted for use in the car, so is able to last for one year