Instruction
1
Of rubberand make tires, shoes, shocks, belts, rubberized fabric and a lot of various parts for automotive and household appliances. If they're worn out, try to return them elasticity by using kerosene. It is a proven and the most commonly used method. Pour some kerosene in an enamel bowl, put rubber part and let it lie there for 2-3 hours. Then carefully wash it in detergent and wipe dry. After that, the rubber will become soft and elastic.
2
Can also use ammonia. Dilute it in the ratio of one to one with water and immerse in a solution of the desired rubber part for 20-30 minutes. After that, rinse with clean water, Pat dry and can use.
3
It happens that the softening of rubber required for a short time, for example, to pull the hose on the metal pipe with equal diameter. To do this, just put the hose end in boiling water, soak a few minutes and pull on the pipe. The boiling water will make the rubber soft, and the hose easily fits over the metal.
4
Rough parts need to relieve can be softened with hot air. Turn the Hairdryer on full power and aim the jet at the detail. After 4-5 minutes, try to turn the item and yank it open.
5
Try to boil the old tires in the salt solution. Take a liter of water, add two tablespoons of salt and boil this solution the product within 10 minutes.
6
Also lubricate the rubber parts with silicone. He has for some time restores their elasticity. Apply the silicone to the part, give a little lie down, and then use. In the same way treat the item with castor oil. A short-term softener rubber. So repeat the procedure as often as possible.
7
Today for maintenance of office equipment produced a special spray softener of rubber. It restores the softness of the rubber rollers in printers and copiers. Buy this spray in specialized stores and use when restoring rubber parts.
