How to adjust the Panasonic Fax

Any office for proper functioning need a Fax machine (Fax). To use it, first it must be configured. To do this, read the attached Fax instructions and the instructions that follow.

Instruction

Set the Fax mode "answering machine/Fax". It works as follows. The Fax receives a call. It automatically detects a dial tone. If it's a regular call, then switch on the answering machine. If you were sent a document, your Fax automatically Panasonic it will take. Don't forget to write a message on the answering machine. It will notify that it is possible to leave a voice message after the beep. If the caller wants to send a Fax, he needs to press the Start button.

Connect the Fax machine to separate lines, if possible. In this case, it is very convenient to adjust the Panasonic Fax as follows. Set it to "Fax". In this case, all calls will be treated as the transfer document. The unit will automatically accept them without any of your intervention. If there is such a need, then specify in the settings of the Fax the number of rings after which it will automatically be triggered on reception of documents.

Set the Fax mode to "Phone" if there is a need to answer all phone calls personally. Then you will have to receive the Fax manually. If you picked up the phone and hear a long beep, it says that you sent a Fax. Press the Start button. If you need to urgently cancel sending the document, press the Stop button.

Plug in the Fax line, additional phone and set it in tone mode, if the Fax is from your workplace far enough. Set Fax settings remote turn-on. To receive a Fax, remove the set phone the phone and press * # 9. To configure Fax Panasonic simply. In order for it to function properly, then just gently to him. Do not start a Fax, when the tray is not paper, and timely replace the cartridge.

Is the advice useful?