Receive live and dead water



Currently, to receive the healing water you do not have to look for some mountain springs and reservoirs. It can be obtained through electrolysis of ordinary tap water at home. From the chemical point of view, living water has alkaline properties and therefore it is perfectly heals wounds. And dead water is a unique disinfectant as it contains acid. When passing through common water, electric current completely changes its structure.

Accordingly, after processing a current of water is divided into two factions. Each has certain medicinal properties. Usually it is recommended to use living and dead water in combination to achieve maximum results.


Camera of live and dead water with their hands



In selling, you can easily find special devices for obtaining activated water. But such a device can be made independently. To do this, take an ordinary glass jar with a lid and clamped on the electrodes using nuts and screws. One of the electrodes is a cathode and the other anode. At the positive electrode will release dead water. This means that at the anode we need to secure the bag made of thick fabric. For such purposes, perfect calico. Importantly, through the tissue normally took the air.

The length of the electrodes for a half-liter banks should not exceed 100 mm. as electrodes can be used in sheet stainless steel. Some even use aluminum electrodes to obtain the charged water. They should be attached to the lid using a special insulating lining.

For the preparation of activated water need to pour the liquid into a cloth bag and strengthen it at the positive electrode. Then it is inserted into a jar of water. You need to consider that the water in the pot should not reach the edges. Usually to cook the living water takes no more than ten minutes. Then the banks pulled out from the electrodes in a separate container and poured the dead water from a special pouch to Pour the water should be very careful not to mix the obtained fractions. To obtain the activated water can be used and design without cloth bag. Then will take two separate containers with separate parts. To provide electrical contact between the two containers can be when you use a cotton harness zamochennogo in gauze.