You will need
- - pencil;
- - soap or lip balm;
- - cotton swabs;
- - pliers;
- - thread and needle;
- - ring of keys;
- - a clip;
- - wire;
- connector for the phone.
If the zipper is stuck in one position, and the thing on you, and you need to remove it, it will help easy way: RUB the zipper teeth with the stem of simple pencil and try to undo.
If there is no effect, then you need to increase the slide. It is possible to RUB the zipper with soap solution, lip balm or anything else. To do this, use a q-tip. Rubbed? Now slightly pull the zipper down again, brush, pull it down a bit, grease, and so as long as lightning does not give you finally.
If the teeth on your zipper apart, then try to repeat the intake with soap and pencil described in the first step. If there is no result, it is likely that the slider something does not work properly. Maybe the lock is stuck fabric or thread or bent one of the teeth. Remove the cloth or thread, or straighten the teeth.
If the teeth are straight and the zipper doesn't hit, then it is probably the case in the slider. The slider can be loosened, and "cure" it, holding it on both sides with pliers so that it is again clamped teeth.
If clamping the runner the problem is not solved, then the slider should be replaced. Take the wire cutters and then remove the old slider and the metal stops on the zipper. Then put on a new zipper slider with pliers and clip limiters.
If the damaged teeth on the zipper at the beginning, then just sew it over the damaged area, if possible enough to undo her.
If the zipper on jeans diverges, then slide in the slider ring, say, keys. Now it is possible to throw on a button, and a button to fasten.
If the runner broke the tab, you can insert a ring of keys or a paperclip. Another option: wire and connector for the phone.