There are several options for exterior finishing of walls of wooden house:
• siding sheathing;
• sheathing block-house;
• sheathing wood Board (batten);
• facing bricks;
• cladding of the facade tiles.
To decide which of these options is best suited for you, is not easy. Much will depend on how the house will fit into the overall standing RYAhouse buildings, the surrounding landscape and what spending you can afford.
In order to give the housethe solidity, the firmness, can coat the walls with bricks or put them facade tiles. The complexity of this finish is that it requires good training, i.e. without the involvement of professional builders can not do that will significantly increase financial costs.
If, however, opted for the facing of walls with brick, first decide the question: will the Foundation increasing the load of the additional wall, even laid in a half-brick. Tiling requires preliminary work - the interior wall mesh and then plaster. Another point to keep in mind if you decide to oblitsevat wall tiles or to impose a brick – this is the age of the house. Newly built house you can decorate these materials only after some time after its construction, because the need to house gave natural shrinkage.
Near-perfect option is wood sheathing or wood, i.e., siding or paneling block-house. At all times, the tree was distinguished from other materials of natural beauty, ability to beautify the appearance of any structure. In addition, this work is quite possible to do yourself and get great satisfaction, contemplating his handiwork. However, upon completion of the work on the hull houseand the need to protect the outer surface from exposure to moisture, i.e. to cover several layers of varnish or paint. Further, these operations must be repeated every two or three years.
Of modern materials most popular siding. Main advantages:
• relative cheapness;
• wide range of colors;
• this material does not require additional maintenance during operation.
The wall siding is quite simple and available to anyone who has the desire to do something with their hands.
Previously from the wooden beam of cross section 50х30мм make the frame for mounting panels. Place the boards vertically, strictly according to the plumb line. Between the extreme bars pull the thread to align the intermediate beams. The bars of the cage mount with a step of 60-70cm. If you are using metal siding in the space between the wall and the panel, lay the insulation and make waterproofing. If you are using siding from vinyl panels device of the heater preferably, but not necessarily. In this case, between the panel and the wall buildingand ventilation shafts are formed. With the help of clips on the frame, secure the siding panel.