Advice 1: How to close-loop for armhole crochet

Pattern parts cut to full size – the best helper when knitting crochet. It will serve as a template on which you can perform any difficult stages of the work. For example, using preliminary calculations on paper, you can easily close the desired loops for a neat armhole sleeveless top or delicate blouse.
How to close-loop for armhole crochet
You will need
  • hook;
  • thread;
  • - tracing;
  • pencil;
  • - notebook;
  • - knitting pattern.
Instruction
1
Draw a line one (e.g. left) armhole sleeve apparel on the pattern in full size. For convenience, you can use tracing paper.
2
Attach the prepared paper template on a sample of the finished knitting, made a basic pattern. It could be the bottom part of the fabric of the front or back of the product. Picture ubavo necessary columns to create a smooth corner of the canvas will be visible.
3
Let's see how many of the elements of the pattern (rapport) includes armhole of the left sleeve in length. For example, you use a simple pattern "arch of air loops". In each repeat included 7 hair temples; the edge of each new arch is fixed by promazyvanija a Central part of the same arches of the lower row.
4
Record in your workbook what part of rapport (one arch) have to work in the first row; then the second row, etc. the Calculation of the line right armhole you make on this sample, but to form it will be in the mirror.
5
Close-loop for armhole by drawing a variety of working threads crochet in the beginning (one arm) or the end (second armhole) row. If you want to lower the canvas at the beginning of the row, pull the thread to the first working loop and pull it through the column. Then continue knitting products, as usual. The level of the columns in the canvas increases. Please note: black thread should be resting, not pulling the knitting!
6
At the end of the series you, on the contrary, it is necessary to lower the level of the bars to the openings. In this case davaite canvas to ubavka and pull the working thread through the last loop of the row. Through the great arc drag the ball of yarn. Leave the loop on the stem of the hook, just tighten it to the size of a regular link in the air chain. Route through which the working thread and tie on.
7
Try to link a sample of pointelle fabric for the front of the blouse 40-42 size. Dial 141 link air chain and the knit part of the front side pattern of the arches. For example, the density of your knit 50 rows in 33 see Davaite 52 range and close both sides by 3 arches. Armholes are ready.
Useful advice
The hook may be needed for shaping the armholes and knitting. Take it in your right hand and pull with it the second loop of the current row through the first loop. A loop back with hook to left needle, and again pull the second loop through the upcoming. To do these manipulations can and two spokes, but the loop can be broken with a smooth working tool.

Advice 2: How to close a loop in the end of the row

Closed loop in the end of a row is usually when promazyvanie arm openings. It is very important to armhole with a smooth transition without steps. There are several ways to close the loop at the end of the number carefully.
How to close a loop in the end of the row
You will need
  • - the spokes;
  • - the thread crochet.
Instruction
1
Tie twenty-loops. Close four loops. To do this, leave nebazhannya five loops in the end of the row. These loops except the last two, move the right needle. Second loop to the right on the left needle thread through the first (the stitches is not necessary).

Following this method continue to route through each other the rest of the loop that need to be closed, place in this one loop. This loop provarite the front loop. In the end, leave five hole and knit the next row from the wrong side.
2
The following method is based on the decrease of loops on the front side. To remove one loop to the right, proverite two loops together make her face. To remove one loop to the left, first move the loop from left needle to right needle. Thread pull behind perenesen loop. Now, run promazyvanie the second loop. At the end of promazyvanija carry her through the first loop removed. This method is executed when the binding on the front surface.
3
In places like the armscye and neckline, it is very important to get a smooth cut, without steps. For this, a number of provarite way broaching. The first edge loop, clear, and behind her vivacite through the first.
4
If you need to close the loop when the wrong binding, you use the following method. Turn the product on the front side. Provarite edge and her next stitch of the front knitting. Will one loop. Place this loop on left needle and repeat the number of loops that you need the same actions.
5
This method close the loop at the end of the row is called "Lace". Provarite the front row and turn the product inside out. This side row knit like this: two front loops, two clear and provarite them along the front hinge. Move back three resulting loops with right needle to the left. Repeat until, until there are three loops. Of these, the first provarite the front, and two the subsequent - together and pull through the first.

Advice 3: How to crochet armhole sleeves

The best helper for knitting crochet is a pattern in life-size parts cut. It serves as a template by which are complex phases of work. For example, with the help of preliminary calculations can be easily and neatly tie crochet armhole sleeve openwork blouse or top.
How to crochet armhole sleeves
You will need
  • thread;
  • hook;
  • - knitting pattern;
  • pencil;
  • - tracing;
  • - the notebook.
Instruction
1
Draw the pattern left or right armhole sleeve clothing in full size. Possible for greater convenience to use tracing paper. Ready paper template attach a sample of the finished knitting, made a basic pattern. Will be clear picture the necessary ubavo columns to create a smooth rounded leaf.
2
Look at how much rapport (elements of the pattern) are included in armhole sleeve length. For example, if you use a simple pattern "arch of air loops", each report contains 7 of the thread handles. Each new arch edge fixed promazyvanie Central section of the same arches of the lower row.
3
In your study journal, write what part of one arch (rapport) should be withdrawn in the first row of the work in the second, etc. For this sample, execute the calculation of the line of the right armhole, but its formation is complete in the mirror.
4
Close loops for different openings by pulling the working yarn with a hook at the end (one arm) or early (the other armhole) row. Pull the thread to the first working loop and pull it through the column if necessary, remove the cloth in the beginning of the row. Continue knitting items on, as usual. At the same time in the canvas increases the level columns. Remember that the extended the thread should not pull the knitting, it should be free.
5
At the end of the row level columns for the armhole decrease. For this davaite to ubavka the canvas and stretch the working thread through the last loop of the row. Drag the ball of yarn formed through a large arc. Leave the loop on the stem of the hook, tightening it up to the size of the common link air chain. Pull the working thread through it and tie on.

Advice 4: How to tie baseball cap for boy crochet?

Stylish baseball cap for the boy to buy not necessarily. It is possible to crochet your own. To create caps with a soft or hard peak you will need approximately 100 grams of yarn, a hook, thread and a needle.
Knitted hat for boy

How to knit a hat for a boy with a hard peak



In addition to the yarn and the hook for crochet baseball cap with hard peak, you will need a plastic bottle and a special paper pattern. So, to start you will need to link the bottom caps. Type single circle of columns without nakida. Once you reach the desired diameter, start to add a loop. If the circumference of your head, equal to 56 cm, height of cap should be 17 inches.
The next step is to purl another row to the column without nakida. It is necessary to strengthen the border. You can then start making the visor. In order to give it the desired shape, take the paper template and attach to a plastic bottle. Trace the template with a pencil and carefully cut out.

After that, you need to dial eighteen of the stitches and add three hinges. Then provarite the first row of columns with nakida. Turn the product on and tie a column without nakida. In the next row, you need to make one column without nakida and link coupling loop. Then turn the workpiece and start knitting the next row with the connecting loops. Then knit a cover for visor only columns with nakida. In the end, be sure to make another connecting loop. Paste the blank template, cut out of the bottle. Then the visor panel along the edge and sew it to the cap. The resulting cap is perfect for boy 7-8 years.


Baseball cap for boy with soft visor



Any cap consists of a visor, the rim and base. Work should start with a crochet Foundation. Dial six loops and provarite twelve columns with nakida without of increases. As a result, you get a circle, the volume of which should correspond to the volume of the head. Then you need to knit the product without increases until you reach the desired depth of the base.

As for the visor, it should be linked separately and attach to the main product columns without nakida. Then add three columns and provarite the last row of loops without nakida. The next stage tie hem bars without nakida. For additional decor you can link the headband and attach it to the cap. To do this, type 78 loops and circles provarite six columns without nakida. The resulting strip is place over canopy and fasten it with invisible stitches and large buttons.
Is the advice useful?
Search