How to purify water activated carbon

As a sorbent for the purification of tap water can be used by various components, such as sludge, the active resin or sawdust. But the most widely available and more effective method of cleaning with activated charcoal.

Why to purify water

The human body is mostly water, but the inner liquid constantly coming out with urine and sweat. If you do not replenish this fluid, you can come dehydration, which, in turn, will lead to disorders in the internal systems and organs.

A healthy person daily requirement of up to two liters of fluid, but this water must be of very high quality and clean. The water that is sold in stores in bottles of different volumes is quite expensive and such expenses not everyone can afford it. It remains only to use for drinking and cooking water tap. But there is one very big problem with the quality of the liquid flowing from the tap. As it is known, contains not only chlorine compounds, but salts of heavy metals, all kinds of pollution, very dangerous impurities that accumulate gradually in the body and can strongly affect health. The classic method of purification of tap unfiltered water is considered ineffective. So is one – purification of the liquid in a more effective way – by sorption.

Advantages of water purification with activated carbon

This sorbent is used the most for filtration due to its many advantages:

- it is absolutely safe for human health, non-toxic and non-toxic;

- fine crumbles into small fractions.

The activated carbon filters used for water purification from various organic compounds, ferric iron, clay sediment, algae, chlorine, viruses and bacteria. In addition, when using activated carbon filter can eliminate unpleasant smell and taste.

How to clean tap water activated carbon?

You can, of course, buy ready-made filter, but they are sold everywhere. However, to create a filter based on this sorbent can, especially since activated charcoal is available in all pharmacies. To create a filter, you will need gauze and some pills of activated charcoal. These pills should be put in gauze, pre-folded several times. After that, tap water intended for drinking, it is necessary to pour into a container, to the same for twelve hours, you have to put and gauze with tablets activated carbon. However, filtered water is not recommended to put in a very warm room, as bacteria will begin to multiply and in the coal environment.

If it was done correctly, the water is purified within twelve hours, and after that it will be possible to drink.