How to glue the Wallpaper to the whitewash

Today, there are a huge number of modern lining coatings for walls, but Wallpaper is still the most relevant among other interior materials. Manufacturers of Wallpaper are constantly improving in their manufacture, use interesting additives and advanced materials. Because of this, it is possible to choose the Wallpaperwhich will fit perfectly in your home interior. But to stick Wallpaper to the whitewash is unlikely to succeed, as they eventually will disappear. So before you begin to repair, you need to get rid of old Wallpaper, paint and whitewash.

You will need

• Wallpaper;
• - glue for Wallpaper;
• meter;
• - roller;
• brush;
• - primer;
• - spatula;
• - putty;
• - an x-ACTO knife.

Instruction

1. The first thing you need to prepare the area for wallpapering, you need to get rid of old wall coatings. If the whitewash pasted the old Wallpaper, try to remove them with a spatula. In places where the Wallpaper does not move away and hold on tight, soak a cloth, apply to the wall and fix this place iron.
2. After removing the old Wallpaper may reveal small defects in the walls of a small depression, etcWallpaperus. Therefore, the presence of cracks and irregularities need to putty the surface of the wall and get rid of dust and dirt.
3. Next, you need to wash the whitewash from the walls. To do this, moisten the layer of whitewash cool water with a brush or brushes and after some time, scrape off the wall with a spatula. Remnants of whitewash rinse with water, do not forget to constantly change the water as the Wallpaper, glued on the whitewash or old distemper, further behind the wall.
4. Before wallcovering programsuite be sure the wall surface is prepared with glue, diluted 20-30% with water. Before beginning work, close the Windows in the room, and avoid drafts - this can be done after complete drying of the Wallpaper.
5. Prepare the glue according to the instructions and mix thoroughly. You can begin to wallpapering. As glue alone is quite difficult, you will need a helper.
6. Before you start to glue the Wallpaper, it is necessary to measure the vertical line of the wall and cut the roll of Wallpaper into pieces with a small margin of 5-10 cm. It is necessary to comply with the periodicity of the pattern. If the Wallpaper is plain or painted, leave a few inches of the stock, as when dry they tend to shrink a little.
7. A piece of the Wallpaper the right size to evenly spread the glue with a brush or roller. Apply glue to the middle of the piece of Wallpaper to the edges. Plastered Wallpaper fold gently in half so that they were soaked with glue and leave for 10 minutes.
8. Impregnated with glue canvas put on the wall and smooth the surface with a soft cushion of bubbles and wrinkles. Rag fit only for paper Wallpaper without patterns in relief. Therefore, for smoothing Wallpaper the most perfect cushion.
9. Begin to glue the Wallpaper from window to door, to avoid visible joints. The cut off excess Wallpaper with a utility knife.