You will need
  • camcorder, webcam, digital camera or camera phone;
  • - led flashlight;
  • - batteries;
  • - infrared light;
  • soldering, neutral flux and the solder;
  • - cutting pliers and miniature pliers.
Instruction
1
As a proper camera you can use almost any digital camera, videocamera, webcamera, mobile phone. All of these devices are able to perceive not only the visible but also infrared light, so any alterations are required. In the picture or video objects lit by this light will look white. Unsuitable for infrared photography only expensive cameras, equipped with filters, check invisible rays.
2
To test the camera sensitivity to infrared rays, use the remote control. Flash its led, absolutely invisible to the eye, the camera should be seen as a bright white with a slightly bluish tint. If they are reddish, such a device is also suitable for shooting, but the sensitivity will be worse. Finally, if outbreaks are not perceived at all, look for another, cheaper machine.
3
But one of sensitivity to infrared rays for shooting in the dark is not enough. You also need the source of such rays. If you are in the hands of an old analog camcorder Sony Handycam Hi8 format, such a source it already has. It is next to the halogen lamp used for visible illumination. Accordingly, the button to turn it on located near the power button is visible spotlight. Press it once and the backlight will turn on again and it will turn off. Some cameras can be enabled and disabled is not a separate button, and through the menu.
4
If the built-in IR-illuminator in the camera is not, it will have to make. Take as a basis the Chinese led lantern - one in which instead of a single powerful diode installed many low-power, diameter e in millimeters. Pull out flashlight batteries and disassemble it. Wipaire all white diodes, and then instead install the polarity infrared of the same diameter. Assemble the flashlight and install the batteries in place observing polarity.
5
To check the resulting infrared spotlights do not point it directly at the camera - it can be damaged. Light them any object, and the camera point at him. Try to turn off the light - if shooting in spite of this, will continue, now you have a real infrared camera.