You will need
- cornice
Instruction
1
Many modern curtains are attached to the eaves with a wide loops of the same fabric as the curtains, or lace, ribbons and other dense tissues. These curtains are hung and removed very easily, but look quite informal, so you should not use this type of attachment is in the offices and libraries. In addition, sometimes the fabric slips badly on the roof, so the blinds are hard to open and close. For this there are special poles that hung to the ledge on the inner edge of the curtains. Leading end of a stick you can easily move the loop in one direction or another.
2
The most expensive and fashionable, perhaps, is the method of mounting the curtains on the grommet. Eyelets - it is a large metal (or cheaper plastic) rings that are attached along the edge of the curtains like rivets. The eyelets look great in the interior and provide good sliding of the curtain along the eaves. But it's a hard way of fixing this would not do at home, and in addition it is not suitable for all fabrics, light fabrics and tulle to attach is impossible.
3
The oldest method of mounting the curtains on the ledge is of various form hooks. The curtain at the top hem sewn little loops of metal or of fabric, thread, thin laces. On the ledge hanging hooks that goes in these loops. The method is very time-consuming, besides the loops with a sharp pinch in curtains strive to come off of the hooks, you have to climb up and fix.
4
Sometimes the curtains are hung on a special crocodile clips. Typically, these clamps are mounted on the cornice of the one-piece loop, and the curtain is inserted into these about as well as linen hung on pegs. This method is also easy will not name, because while the shade keeps the very small number of clips, she can't afford to hang on them full weight. It turns out that it is necessary to keep the blind, and even to unclench the clips and insert the top edge. The advantage of this method is that it is possible not to prepare the curtain. Of course, it needs to be hemmed, but no loops or rings to sew is not additionally required.
Note
In fact, any installation of cornices involves a set of specific actions. According to the instructions, You assemble the cornice, plan places for holes. Depending on the diameter of the dowels, make holes in the wall. Next, insert the dowels, fix the screws, hang the cornice and with a clear conscience can enjoy the fruits of their labor.
Useful advice
You will need tools such as a chisel, a large claw hammer, a hacksaw, upholstery-upholstery hammer, drill, scissors, pliers, screwdriver.