You will need
  • 1) Jeans
  • 2) Fabric for the substrate
  • 3) Tailor's chalk
  • 4) Paper (any) for stencils
  • 5) Scissors
  • 6) Thread
  • 7) a Sewing machine.
Instruction
1
Look closely at the jeans. Rate what style they're made, and imagine in detail what you want to do with them. For better visualization you can draw on trousers tailor's chalk, soap or a simple pencil.
2
Now select the one which suits you. Jeans can be cut without the backing of (then will appear through legs or tights), or use her as a tissue. The fabric should be soft, pleasant to the body to avoid irritation. It is desirable that it was thinner than jeans, and other colors will be visible in the slots).
3
The drawings can also be different. You can just cut in a straight line, or perform incisions in the form of rectangles. You can make stencils from paper. In this case, place them on the jeans and see how the composition looks, and then draw around it with chalk.
4
If no substrate is cut along the planned paths. Do not just take too large cuts. First, a little. Periodically double back to 1.5-2 m and see how it turns out. Can try on. Remember: make the cut, but less – is not. Slicers can be razlomalis, pull out the thread.
5
When working with the substrate should carve out at 1-1,5 cm more cut and process the slices from crumbling. Now strut inner or outer seam of the jeans (the one which does not have double topstitching). Pin the backing on the reverse side on the planned lines, baste and lay the engine line. Machine stitching can be done figured.
6
Now or just make an incision (or cut) inside the resulting contour on the denim, or you can do the following. Lay on the contour of an application for another few lines. Move inside the shape, and from every line of retreat of the same or different distance. Lines should be smooth. Now make slits between the lines.